Nikon LS-2000 manual Insert an adapter in the scanner

Page 32

4. Scanning

Step 3—Insert an adapter in the scanner

The LS-2000 comes with separate adapters for scanning mounted 35

mmslides and strips of 35 mm film containing up to six frames each. Either adapter can be inserted in the scanner while the scanner is on. Before mounting an adapter in the adapter slot, check that the scanner’s status LED is glowing steadily. Adapters should not be inserted or removed while the status LED is blinking. Open the scanner’s front cover and slide the adapter in as shown in the illustra- tions below, stopping when the adapter is fully inserted. In the case of the SA-20, be sure that the connectors on the rear of the adapter are fully inserted in the connectors at the back of the adapter slot.

Inserting the

MA-20 SLIDE

MOUNT

ADAPTER

22	Nikon LS-2000 35 mm Film Scanner User’s Guide

Image 32

Contents Page Page LS-2000 Users GuideSymbol Trademark InformationIii Safety Precautions Keep cleanDo not disassemble Do not modifyDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Vii Contents Overview Overview Parts and Accessories What’s in the BoxParts of the LS-2000 Choose a location for the scanner SetupSetting up the LS-2000 When installing the scanner on its base Setup Connect the power cable Safety PrecautionsDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Macintosh Software InstallationReview the system requirements Install Adobe Acrobat Reader WindowsInstall Nikon Scan From disk provided by hardware Setup Start Nikon Scan ScanningTurn on your computer Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a film type Choose a color spaceChoose a thumbnail SA-20 Perform a preview scanAuto contrast adjustment Select a cropAdjust color balance, contrast, and brightness Remove dust and scratchesScan the selected crop Scan additional imagesScanning Appendix Nikon Scan Controls Menus, Tabs, and Information DisplaysButtons Scanner Extras Drawer Control DrawersScan-Size Drawer Curves-and-Levels Drawer Color-Balance DrawerPreferences Color managementEC Declaration of Conformity Declaración DE Conformidad DE LA CEE