Nikon LS-2000 manual Connect the Scsi cable

Page 20

3. Setup

Step 4—Connect the SCSI cable

The LS-2000 connects to your computer by a Small Computer Systems Interface, or SCSI. To use a SCSI connection, you will need an appropriate SCSI cable and, in the case of IBM PC/AT compatible computers, a SCSI extension board (“SCSI adapter”) or PCMCIA card (see the FastTrack Guide and the LS-2000 Reference Manual for details). This section describes the procedure to con- necting the LS-2000 to a SCSI “chain” made up of your computer and SCSI devices connected to it in a series.

SCSI devices cannot be connected while the power is on. Before connecting the scanner to the SCSI chain, be sure that the computer and all other devices in the chain, including the scanner, are off. How the scanner should be connected to the chain depends on whether it is to be located between other devices or attached at the end of the chain.

10	Nikon LS-2000 35 mm Film Scanner User’s Guide

Image 20

Contents Page Page LS-2000 Users GuideSymbol Trademark InformationIii Safety Precautions Keep cleanDo not disassemble Do not modifyDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Vii Contents Overview Overview Parts and Accessories What’s in the BoxParts of the LS-2000 Choose a location for the scanner SetupSetting up the LS-2000 When installing the scanner on its base Setup Connect the power cable Safety PrecautionsDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Macintosh Software InstallationReview the system requirements Install Adobe Acrobat Reader WindowsInstall Nikon Scan From disk provided by hardware Setup Start Nikon Scan ScanningTurn on your computer Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a film type Choose a color spaceChoose a thumbnail SA-20 Perform a preview scanAuto contrast adjustment Select a cropAdjust color balance, contrast, and brightness Remove dust and scratchesScan the selected crop Scan additional imagesScanning Appendix Nikon Scan Controls Menus, Tabs, and Information DisplaysButtons Scanner Extras Drawer Control DrawersScan-Size Drawer Curves-and-Levels Drawer Color-Balance DrawerPreferences Color managementEC Declaration of Conformity Declaración DE Conformidad DE LA CEE