Nikon LS-2000 manual Choose a film type, Choose a color space

Page 35

4. Scanning

✔Cautions

•Examine the film for use in the SA-20 carefully prior to scan- ning. Film must be flat or curl slightly towards the emulsion surface (film should fit in the gauge on top of the adapter). Film cannot be used in the adapter if:

•there is tape on the film

•the film has been folded

•the perforations have been torn

•the film has been cut on an angle or torn

Film that cannot be scanned in the SA-20 can be scanned in the MA-20 slide adapter using the FH-2 film holder (see the LS- 2000 Reference Manual).

•Film must be clean and free from fingerprints. In the case of the SA-20, the presence of dirt could cause damage to the film. Before scanning, remove dust with a blower and gently wipe off any finger prints with a soft, dry cloth.

Detailed information on the kinds of film appropriate for use in the LS-2000 and on inserting film, see the LS-2000 Reference Manual.

Step 5—Choose a film type

In the scan window, select a film type appropri- ate to the type of film (positive or negative) inserted in the scanner.

Step 6—Choose a color space

Choose a color space from among those listed in the color-space pop-up menu. The color spaces available depend on whether Nikon Color Management is used; see the software reference manual for your platform for details. By default, color spaces of calibrated RGB (sRGB), CMYK, and HSL are available.

Nikon LS-2000 35 mm Film Scanner User’s Guide

25

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Page Page Users Guide LS-2000Trademark Information SymbolIii Do not modify Safety PrecautionsKeep clean Do not disassembleDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Vii Contents Overview Overview What’s in the Box Parts and AccessoriesParts of the LS-2000 Choose a location for the scanner SetupSetting up the LS-2000 When installing the scanner on its base Setup Safety Precautions Connect the power cableDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Macintosh Software InstallationReview the system requirements Windows Install Adobe Acrobat ReaderInstall Nikon Scan From disk provided by hardware Setup Start Nikon Scan ScanningTurn on your computer Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a color space Choose a film typePerform a preview scan Choose a thumbnail SA-20Select a crop Auto contrast adjustmentRemove dust and scratches Adjust color balance, contrast, and brightnessScan additional images Scan the selected cropScanning Menus, Tabs, and Information Displays Appendix Nikon Scan ControlsButtons Scanner Extras Drawer Control DrawersScan-Size Drawer Color-Balance Drawer Curves-and-Levels DrawerColor management PreferencesEC Declaration of Conformity Declaración DE Conformidad DE LA CEE
Top Page Image Contents