Nikon LS-2000 manual Do not connect or disconnect the cable while the power is on

Page 19

3. Setup

•Should the insulation become damaged and the wires become exposed, contact your retailer or Nikon service office for replacement. Continued use could cause fire or electric shock.

•Do not handle the cable when your hands are wet. Doing so could cause electric shock.

•The outlet into which the power cable is plugged must be grounded. Failure to ground the power supply could result in electric shock.

•The scanner and all devices to which it is connected must be connected to a common ground. If a common ground is not used, a ground loop could occur, causing electric shock or static “noise.”

•Do not plug the power cord into

an extension cord or multiple- outlet extension, as this could result in fire or malfunction.

•Use an independent outlet whenever possible. If the scanner is plugged into an outlet to which a household appliance such as a vacuum cleaner or air-conditioner is connected, the scanner’s power supply may be subject to noise.

•Unplug the power cable by

pulling on the plug, not on the cable itself. Pulling directly on the cord could result in damage that could cause fire or electric shock.

The shape of the cable depends on the country of sale

•Do not connect or disconnect the cable while the power is on.

Nikon LS-2000 35 mm Film Scanner User’s Guide

9

Image 19

Contents Page Page Users Guide LS-2000Trademark Information SymbolIii Do not modify Safety PrecautionsKeep clean Do not disassembleWhen performing routine maintenance When not using for an extended periodDo not place foreign objects inside the scanner When transporting the scanner Vii Contents Overview Overview What’s in the Box Parts and AccessoriesParts of the LS-2000 Setting up the LS-2000 SetupChoose a location for the scanner When installing the scanner on its base Setup Safety Precautions Connect the power cableDo not connect or disconnect the cable while the power is on Connect the Scsi cable When the scanner is the last device in the chain When the scanner is between other devices Scsi connection checklist Set the scanner’s Scsi ID 0 0 9 8MADE in Japanscsi NB Terminator OFF Review the system requirements Software InstallationMacintosh Windows Install Adobe Acrobat ReaderInstall Nikon Scan From disk provided by hardware Setup Turn on your computer ScanningStart Nikon Scan Insert an adapter in the scanner Inserting the SA-20 Strip Film Insert film Choose a color space Choose a film typePerform a preview scan Choose a thumbnail SA-20Select a crop Auto contrast adjustmentRemove dust and scratches Adjust color balance, contrast, and brightnessScan additional images Scan the selected cropScanning Menus, Tabs, and Information Displays Appendix Nikon Scan ControlsButtons Scan-Size Drawer Control DrawersScanner Extras Drawer Color-Balance Drawer Curves-and-Levels DrawerColor management PreferencesEC Declaration of Conformity Declaración DE Conformidad DE LA CEE