Solving computer problems
If these items are correct, have the computer serviced.
Problem:
The critical
Solution:
The battery power is getting low. Connect the ac adapter to the computer, or replace the battery with a fully charged one.
Problem:
When you take action to return from standby mode, the computer display remains blank.
Solution:
Check whether an external monitor was disconnected while the computer was in standby mode. Do not disconnect the external monitor while the computer is in standby mode or hibernation mode. If no external monitor is attached when the computer resumes, the computer display remains blank and output is not displayed. This restriction does not depend on the resolution value. Press Fn+F7 to bring up the computer display.
Note: If you use the Fn+F7 key combination to apply a presentation scheme, press Fn+F7 at least three times in three seconds, and the image is displayed on the computer screen.
Problem:
The computer does not return from standby mode, or the standby indicator stays on and the computer does not work.
Solution:
If the system does not return from standby mode, it may have entered standby or hibernation mode automatically because the battery is depleted. Check the standby indicator.
vIf the standby indicator is on, your computer is in standby mode. Connect the ac adapter to the computer; then press Fn.
vIf the standby indicator is off, your computer is in hibernation mode or
If the system still does not return from standby mode, your system may stop responding and you cannot turn off the computer. In this case, you need to reset the computer. If you have not saved your data, it may be lost. To reset the computer, press and hold the power button for 4 seconds or more. If the system is still not reset, remove the ac adapter and the battery.
Problem:
Your computer does not enter standby or hibernation mode.
22ThinkPad® R50 Series Service and Troubleshooting Guide