Sanyo Proj05 owner manual Compliance Federal Communications Commission Notice

Page 2

Compliance

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter- ference to radio communications. Operation of this equipment in a residen- tial area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.



Image 2
Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to an Ethernet cable Network configuration Network iconDescription Key pallet Move key Network PIN code Network PIN code screenNetwork factory default Network informationChapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesIndicates the model name of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the serial number of the projectorNetwork PIN code setting Network configuration Sets Dhcp configuration ON/OFFMail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / DeleteSetting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation windowAbout projector condition Status DescriptionControl InputItem Description Input signal are listedSystem Image adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingResets the Screen settings Adjusts the image zoom in and outAdjusts the focus of the image Right buttons to adjust them quicklySetting Sets on or off the logo display on Default, OFFRemote control Screen during the startup. UserVideo delay control....Sets the digital processing Frequency.............When Frame lock is set to AutoItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Controlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network To another networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? TingWhat is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KE2AL