Sanyo Proj05 owner manual Video delay control....Sets the digital processing

Page 42

Chapter 4 Controlling the Projector

Setting 3

Item Description

Video delay control....Sets the digital processing of the

image faster. (OFF, Low, Mid, High) Closed caption...Sets the closed caption function.

Closed caption...Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)

Color......................Sets the color of the contents. (Color,

White)

Frame lock............Sets the frame lock frequency of the

image. (Auto, Manual 23.98Hz, Manual 25Hz, Manual 29.97Hz, Manual 50Hz, Manual 59.94Hz, Manual 60Hz)

Frequency.............When "Frame lock" is set to "Auto",

"Frequency" function is disable. When "Frame lock' is set to "Manual", the cur- rent frame lock frequency is displayed.

Click "+" or "-" and then the projector automatically search to the nearest available frequency. At this time, the text box of "Frame lock" will be changed to "Manual ---". Click "Reset", a confirmation display appears, and then click "OK", the frame lock fre- quency will be reset.

Filter counter(h)...Displays the filter counter. Reset the time after filter cartridge replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. * Do not reset the Filter counter when the filter cartridge is not replaced.

Filter warning.....Sets the time to indicate the filter warning message on the screen. (OFF, 1000H,

2000H, 3000H)

Scrolls remaining...Displays the scrolls remaining of the filter. Reset the scroll counter after filter car- tridge replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset.

*Do not reset the Scrolls remaining when the filter cartridge is not replaced. Freeze.......................Sets the image to freeze mode. (ON, OFF)

Test pattern..........Sets the preset image of the projector. (OFF, color, Gradation1 - Gradation4, All white, All black, Cross))

Factory default.... Sets all of the projector control items to the factory default setting except the fol- lowing items.

User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ time, Network PIN code, Network setting

*This function is not effective for the settings of Network address settings, e-mail settings, etc.

42

Image 42

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to an Ethernet cable Network configuration Network iconDescription Key pallet Move key Network PIN code Network PIN code screenNetwork factory default Network informationChapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesIndicates the model name of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the serial number of the projectorNetwork PIN code setting Network configuration Sets Dhcp configuration ON/OFFMail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / DeleteSetting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation windowAbout projector condition Status DescriptionControl InputInput signal are listed SystemItem Description Image adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingResets the Screen settings Adjusts the image zoom in and outAdjusts the focus of the image Right buttons to adjust them quicklySetting Sets on or off the logo display on Default, OFFRemote control Screen during the startup. UserVideo delay control....Sets the digital processing Frequency.............When Frame lock is set to AutoInformation InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Controlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network To another networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? TingWhat is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KE2AL