Sanyo Proj05 owner manual Why doesn’t the setting page appear in my web browser?

Page 57

Q&A

Q&A

Installation/Access

QWhy doesn’t the setting page appear in my web browser?

AFollowing causes are possible. Please check them.

1.The projector does not connect to the network. Check LED indicators status (☞ p.13).

-Check the connection of LAN cable if the LINK Lamp does not light green.

-Check the network configuration of the projector if the ACT Lamp does not blink orange.

2.Wrong network configuration of the computer. Check the network configuration of the computer.

3.The proxy setting of the web browser is not set correctly (☞ p.52).

4.The computer does not provide TCP/IP protocol.

QHow can I restrict access from the computer.

A1. Please use the password authentication function on the login page (☞ p.23).

2.Please use the IP filtering function provided with the gateway (router) to restrict the accessing from the computer. For further information please con- sult your network administrator.

QCan I access the projector installed on the company’s local area network from a remote location?

AThere are some ways to access to the projector in the LAN, but you must consult your network administrator for security reason.

☛Use of modem

(Connect to the company’s network from your home or some other places by using modem.)

☛Use of private line

(Connect to the company’s network from the branch office or maintenance office by using private line.)

☛Use of internet

(Connect to the company’s network from your home, branch office or some other places by using the internet.)

ENGLISH

57

Image 57

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to an Ethernet cable Network icon Network configurationDescription Network PIN code Network PIN code screen Key pallet Move keyNetwork information Network factory defaultChapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonSets the Network PIN code to login the setting page. +p.23 Initial settingIndicates the model name of the projector Indicates the serial number of the projectorNetwork PIN code setting Sets Dhcp configuration ON/OFF Network configurationMail setting Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Check / DeleteError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed SystemItem Description Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorAdjusts the focus of the image Adjusts the image zoom in and outResets the Screen settings Right buttons to adjust them quicklySetting Remote control Default, OFFSets on or off the logo display on Screen during the startup. UserFrequency.............When Frame lock is set to Auto Video delay control....Sets the digital processingInformation InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KE2AL