Sanyo Proj05 owner manual Setting POP server, Error message for sending alert mail

Page 27

E-mail setting

4Setting POP server

When "POP before SMTP" is selected at "Auth" of "SMTP Authentication setting", enter "POP server*2" and "POP server port" and click Set button.

*2 The POP server is a server for receiving e-mail.

Please contact your network administrator to have this POP server address.

Error message for sending alert mail

When the projector has an abnormality, an alert message will be sent to the registered E-mail address.

If the SMTP server is missing or the authen- tication is not completed because of input error in E-mail address setting or SMTP authentication setting when sending alert e-mail, the error message will be displayed. Please check the respective settings.

Option selection for sending alert mail

Click Option sub menu tab. Check the con- dition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

Error message for missing SMTP server

Error information

Error message for authentication problem

Error information

Option

✐"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control.

✐Up to 99,999 hours can be set for use time.

ENGLISH

27

Image 27

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to an Ethernet cable Network icon Network configurationDescription Network PIN code Network PIN code screen Key pallet Move keyNetwork information Network factory defaultChapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonIndicates the serial number of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the model name of the projectorNetwork PIN code setting Sets Dhcp configuration ON/OFF Network configurationMail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addressesError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ informationUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Popup confirmation window Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlInput signal are listed SystemItem Description Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorRight buttons to adjust them quickly Adjusts the image zoom in and outAdjusts the focus of the image Resets the Screen settingsSetting Screen during the startup. User Default, OFFRemote control Sets on or off the logo display onFrequency.............When Frame lock is set to Auto Video delay control....Sets the digital processingInformation InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KE2AL