Sanyo Proj05 Snmp setting, PJ information, Enter user name of the projector etc. optional

Page 29

SNMP setting

SNMP setting

This projector provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists of a manager and agents. The group which communicates information each other with SNMP is called

"Community". There are two access modes in a community, Refer (read only) and Set (read- write). This projector allows to use Refer (read only) only. The SNMP message informs the pro- jector status called "Trap" to an administrator. Click SNMP Setting on the main menu and set up each item.

PJ information
Item	Description
Contact	Enter user name of the projector etc. (optional)
Place	Enter place of the projector (optional)

Community name(refer).......Enter community name (read only). Default name is "public".

Trap
Item		Description
Community name		Enter community name to send "Trap". Default name is "public".
Trap address		Enter IP address of the SNMP manager computer to receive "Trap".

ENGLISH

29

Image 29

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to an Ethernet cable Network icon Network configurationDescription Network PIN code Network PIN code screen Key pallet Move keyNetwork information Network factory defaultChapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonSets the Network PIN code to login the setting page. +p.23 Initial settingIndicates the model name of the projector Indicates the serial number of the projectorNetwork PIN code setting Sets Dhcp configuration ON/OFF Network configurationMail setting Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Check / DeleteError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlItem Description Input signal are listedSystem Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorAdjusts the focus of the image Adjusts the image zoom in and outResets the Screen settings Right buttons to adjust them quicklySetting Remote control Default, OFFSets on or off the logo display on Screen during the startup. UserFrequency.............When Frame lock is set to Auto Video delay control....Sets the digital processingItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KE2AL