Sanyo Proj05 owner manual Use of telnet, Control, Use the IP address assigned to the projector

Page 50

Chapter 5 Appendix

Use of telnet

You can control the projector by using the telnet application*1 installed on your computer. Normally, the telnet application is available on your computer.

* The telnet 10000 port is used to control the projector.

Control

(For example, in case of using the telnet application of Windows XP Professional.)

1.Select Run... submenu from Start menu on the computer. Type "telnet" onto the Open text area on the displayed window and press OK button.

(For example, in case of using the telnet application of Mac OS X v 10.4)

1.Select Terminal from Applications -->Utilities.

Type as below on the displayed window. > telnet [return]

2.The telnet application will start and the following window will be displayed. Type as below to connect the projector.

>open 192.168.1.201 10000 [return]

* Use the IP address assigned to the projector.

50

Image 50

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to an Ethernet cable Network configuration Network iconDescription Key pallet Move key Network PIN code Network PIN code screenNetwork factory default Network informationChapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesIndicates the model name of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the serial number of the projectorNetwork PIN code setting Network configuration Sets Dhcp configuration ON/OFFMail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / DeleteSetting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation windowAbout projector condition Status DescriptionControl InputItem Description Input signal are listedSystem Image adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingResets the Screen settings Adjusts the image zoom in and outAdjusts the focus of the image Right buttons to adjust them quicklySetting Sets on or off the logo display on Default, OFFRemote control Screen during the startup. UserVideo delay control....Sets the digital processing Frequency.............When Frame lock is set to AutoItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Controlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network To another networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? TingWhat is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KE2AL