Sanyo Proj05 owner manual Image adjustment, Image mode Video Computer

Chapter 4 Controlling the Projector

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast		Adjusts picture con-
Brightness		trast. (0~ 63)
		Adjusts picture bright-
Color		ness. (0~ 63)
		Adjusts picture color
Tint		saturation. (0~ 63)
		Adjusts picture hue.
BrilliantColor		(0~ 63)
		Applies improved
		color performance
		with the BrilliantColor™
Color temp		technology. (ON, OFF)
		Sets a color temperature
		mode. (XLow, Low, Mid,
White Balance		High, Adj.)
Red, Green, Blue		Adjusts each white
		balance respectively.
		(0~ 63)

*When Color matching is set to "On" and changing the "Target" value of "Advanced color match- ing", the color temp. indicates "Adj."

Offset

Red, Green, Blue	Adjusts each offset
Sharpness	respectively. (0~ 63)
	Adjusts picture sharpness. (0~ 31)
Gamma	Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction	Switches noise reduction mode (ON, OFF)
Progressive	Switches progressive mode (ON, OFF, Film)
Reset	Resets the Image adjustment to previous levels.
Store	Stores the Image adjustment values. Select an item [Image1 - Image10]
	from the pull-down menu and click Store button.

Load image mode..............Loads the Image mode. Select an image mode from the pull-down menu

and click Load button. There may not be available mode depending on the input mode as shown in the table left.

36

Input source

Image mode Video Computer

Standard	4	4
Cinema	4	*
Real	*	4
Dynamic	4	4
Image1 - 10	4	4

✐The mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".