Sanyo Proj05 owner manual Indication of the lamp status, Indication of the filter status, Status

Page 45

Information

Indication of the lamp status

Icon display/background	Status
White/Blue	Lamp on (Normal)

White/Red	Lamp on (Lamp is being used over a specified use time, replace lamp
White/Red	immediately)
Gray/Blue	Lamp off (Normal)

Gray/Red	Lamp off (Lamp is being used over a specified use time, replace lamp
Gray/Red	immediately)
Red/Blue with X	Lamp failure (Lamp failure, check lamp condition)

Red/Red with X	Lamp failure (Lamp failure and lamp is being used over a specified use
Red/Red with X	time, replace lamp immediately)

Indication of the filter status

Icon display/background	Status
Blue	Good condition.
Blue

Yellow/Gray	Filter is almost clogged.

	Filter is clogged. Replace a filter with new one.
Red/Gray	* When the projector cannot decode the return from the filter cartridge,
	this icon also appears.

ENGLISH

45

Image 45

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to an Ethernet cable Network icon Network configurationDescription Network PIN code Network PIN code screen Key pallet Move keyNetwork information Network factory defaultChapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonSets the Network PIN code to login the setting page. +p.23 Initial settingIndicates the model name of the projector Indicates the serial number of the projectorNetwork PIN code setting Sets Dhcp configuration ON/OFF Network configurationMail setting Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Check / DeleteError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed SystemItem Description Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorAdjusts the focus of the image Adjusts the image zoom in and outResets the Screen settings Right buttons to adjust them quicklySetting Remote control Default, OFFSets on or off the logo display on Screen during the startup. UserFrequency.............When Frame lock is set to Auto Video delay control....Sets the digital processingInformation InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KE2AL