Sanyo PDG-DXL2000 Setting Smtp server and administrator address, Setting Smtp authentication

Page 26

26

Chapter 3 Basic Setting and Operation

1Setting SMTP server and administrator address

Enter the server name or IP address of the SMTP server*1, the port number of the SMTP server and administrator address and click Set button. The administrator address is set to "Reply-To" address of the message sent from the projector.

*1 The SMTP server is a server for sending e-mail. Please contact your network administrator to have this SMTP server address.

2Registering and deleting E-mail addresses

Enter the e-mail address onto "Add e-mail address" and click Set button.

To check the registered addresses, click

Check/Delete sub menu tab. The address- es are listed as the figure on the right.

✐Up to 10 E-mail addresses can be registered.

To delete the registered addresses, check the address you want to delete and click Delete button.

3Setting SMTP authentication

Set the SMTP authentication concerned and click Set button. Please contact your network administrator in details.

✐ If the projector sends an alert message due to the abnormality on the projector but the SMTP server is down in some other reason, the message will not be sent. In this case, the message "Unable to connect to server." will be displayed on the setting page. To clear this message, set up SMTP server address again.

✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.

✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net- work environment.

✐ The projector does not send message to the address set in "Administrator address" text box. If you want to send e-mails to the administrator address, enter the administrator address into "Add address" text box.

Image 26

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationAddress ComplianceFederal Communications Commission Notice Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN codeNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Sets Dhcp configuration ON/OFF Network configurationDisplays the selected LAN mode Enter Smtp password. up to 63 characters Mail settingEnter e-mail address of administrator Enter Port number of the Smtp server. from 1 toRegistering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Setting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation windowAbout projector condition Status DescriptionControl InputSystem Input signal are listedInput signal are listed Auto is fixed at the Scart inputSound Suppresses the sound. ON, OFFImage adjustment PC adjustment See the next page for the description of other functions Setting up the projectorScreen setting Setting Ment mode Ready, Shutdown, OFF if Power OutSets into the selected power manage Input signal is interrupted and noInformation Items DescriptionIndication of the lamp status StatusControlling the Projector Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Gateway Router installed in the network Entrance hallUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Ting Why cant be turned on/off with web browser?Why am I not receiving E-mail alert messages? What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KV8AC