Sanyo PDG-DXL2000 Sets the Computer in 2/MONITOR, OUT terminal. Computer2, Monitor, Power Out

Page 41

Setting up the projector

Setting 2

Item	Description

Terminal	Sets the COMPUTER IN 2/MONITOR
	OUT terminal. (Computer2, Monitor
Power	out)

management	Sets into the selected power manage-
	ment mode (Ready, Shutdown, OFF) if
	the input signal is interrupted and no
	control key is pressed for the specified
	period of time.
	*The specified time can be set 1 to 30
Direct on	min.
	Sets the power-on mode when the AC cord is connected to the outlet. (ON. OFF)
Lamp control	Selects lamp control mode. (Normal, Eco)
Key lock	Sets the prohibition of controls either Projector or Remote control. (OFF, Projector
Fan control	keys, Remote control)
	Sets the fan control speed.
	OFF	Normal mode
	ON1	Highland mode 1
Lamp Corres.	ON2	Highland mode 2

Value(h)	Displays the lamp use time (Corresponding value) . Reset the time after lamp
	replacement. Click "Reset", a confirmation display appears, and then click "OK", the
	time will be reset.

Setting 3

Item Description

Filter counter......Displays the filter counter. Reset the time

after filter replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset.

Filter warning.....Sets the time to indicate the filter warn-

ing message on the screen. (OFF, 2000H, 3000H, 4000H)

Factory default.... Sets all of the projector control items to

the factory default setting except the fol- lowing items.

	User Logo, Log PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
	time
No show	* This function is effective for all the Network settings.
No show	Sets the black out image temporarily. (ON, OFF)
Freeze	Sets the image to freeze mode. (ON, OFF)

Closed caption..Sets the closed caption function.

Closed caption...Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)

Color

Sets the color of the contents. (Color, White)

ENGLISH

41

Image 41

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Sets Dhcp configuration ON/OFF Network configurationDisplays the selected LAN mode Enter e-mail address of administrator Mail settingEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 toRegistering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Error message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed Input signal are listedSystem Auto is fixed at the Scart inputSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment See the next page for the description of other functions Setting up the projectorScreen setting Setting Sets into the selected power manage Power OutMent mode Ready, Shutdown, OFF if Input signal is interrupted and noItems Description InformationStatus Indication of the lamp statusControlling the Projector Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why cant be turned on/off with web browser?Why am I not receiving E-mail alert messages? What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KV8AC