Sanyo PDG-DXL2000 owner manual Why cant be turned on/off with web browser?, Ting

Page 57

Q&A

Operation

QWhy can't be turned on/off with web browser?

APlease make sure the settings of the projector are correct to use the projector.

Please set the Standby mode of the projector's Setting menu to "Network". Refer to "4. Controlling the Projector" ➔ "Power control and status check" (☞ pp.32 - 33).

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the setting

is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both

the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. Please consult your network administrator.

QHow many numbers of the E-mail address can I register in the E-mail set-

ting page.

AYou can register up to 10 addresses.

QWhy am I not receiving E-mail alert messages?

A Make sure that the registered E-mail address and SMTP server address are correct. If

the SMTP server is located in your LAN (Local Area Network), the address should be set to the SMTP server in your LAN. The SMTP server located outside of your LAN

may not be available for security reason. For further information please contact your network administrator (☞ p.25).

ENGLISH

57

Image 57

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Network configuration Displays the selected LAN modeSets Dhcp configuration ON/OFF Enter e-mail address of administrator Mail settingEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 toSetting Smtp server and administrator address Setting Smtp authenticationRegistering and deleting E-mail addresses Error message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed Input signal are listedSystem Auto is fixed at the Scart inputSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment Setting up the projector Screen settingSee the next page for the description of other functions Setting Sets into the selected power manage Power OutMent mode Ready, Shutdown, OFF if Input signal is interrupted and noItems Description InformationStatus Indication of the lamp statusControlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KV8AC