Sanyo PDG-DXL2000 owner manual Setting POP server, Error message for sending alert mail

Page 27

E-mail setting

4Setting POP server

When "POP before SMTP" is selected at "Auth" of "SMTP Authentication setting", enter "POP server*2" and "POP server port" and click Set button.

*2 The POP server is a server for receiving e-mail.

Please contact your network administrator to have this POP server address.

Error message for sending alert mail

When the projector has an abnormality, an alert message will be sent to the registered E-mail address.

If the SMTP server is missing or the authen- tication is not completed because of input error in E-mail address setting or SMTP authentication setting when sending alert e-mail, the error message will be displayed. Please check the respective settings.

Option selection for sending alert mail

Click Option sub menu tab. Check the con- dition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

Error message for missing SMTP server

Error information

Error message for authentication problem

Error information

Option

✐"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the top control or the remote control.

✐Up to 99,999 hours can be set for use time.

ENGLISH

27

Image 27

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationTelephone No 818998-7322 ComplianceFederal Communications Commission Notice AddressSafety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordNetwork configuration Displays the selected LAN modeSets Dhcp configuration ON/OFF Enter Port number of the Smtp server. from 1 to Mail settingEnter e-mail address of administrator Enter Smtp password. up to 63 charactersSetting Smtp server and administrator address Setting Smtp authenticationRegistering and deleting E-mail addresses Error message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ informationUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Popup confirmation window Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlAuto is fixed at the Scart input Input signal are listedInput signal are listed SystemSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment Setting up the projector Screen settingSee the next page for the description of other functions Setting Input signal is interrupted and no Power OutSets into the selected power manage Ment mode Ready, Shutdown, OFF ifItems Description InformationStatus Indication of the lamp statusControlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KV8AC