Sanyo PDG-DXL2000 owner manual Image adjustment

Page 37

Control

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item

Description

Contrast

Adjusts picture con-

Brightness

trast (0~ 63)

Adjusts picture bright-

Color

ness (0~ 63)

Adjusts picture color

Tint

saturation (0~ 63)

Adjusts picture hue

Color temp

(0~ 63)

Sets a color temperature

 

mode. (High, Mid, Low,

White Balance

X Low,, User.)

 

Red, Green, Blue

Adjusts each white

 

balance respectively.

 

(0~ 63)

*When changing the value of the white balance, the color temp. indicates "User".

Sharpness

Adjusts picture sharp-

 

ness. (0~ 15)

Gamma

Switches brightness of darker part of the picture. (Default, 1.8, 2.0, 2.2, 2.4, 2.6)

Noise reduction

Switches noise reduction mode (OFF, L1, L2)

Progressive

Switches progressive mode (OFF, L1, L2, Film)

Reset

Resets the Image adjustment to previous levels.

Store

Stores the Image adjustment values. Select an item [Image1 - Image4] from

 

the pull-down menu and click Store button.

Load image mode........ Loads the Image mode. Select an image mode from the pull-down menu and

click Load button. (Dynamic, Standard, Real, Cinema, Image1-4)

ENGLISH

37

Image 37
Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorUse of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Enter e-mail address of administrator Mail settingEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 toSetting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Error message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalTrap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed Input signal are listedSystem Auto is fixed at the Scart inputSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment Screen setting Setting up the projectorSee the next page for the description of other functions Setting Sets into the selected power manage Power OutMent mode Ready, Shutdown, OFF if Input signal is interrupted and noItems Description InformationStatus Indication of the lamp statusControlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Entrance hall Gateway Router installed in the networkControl Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KV8AC