Sanyo PDG-DXL2000 owner manual What are the rules for IP address assignment?

Page 58

Chapter 5 Appendix

Others

QWhat are the rules for IP address assignment?

AIf the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assign- ment.

Rule1

Do not configure the same IP address to the network equipment in the same network group. Each piece of equipment must be assigned a unique IP address.

If the IP address is set [192.168.x.x], the Subnet Mask should be set [255.255.255.0] for example.

Rule2

The start address [xxx.xxx.xxx.0] and the last address [xxx.xxx.xxx.255] of the IP address must not be assigned to any other equipment. These address numbers are reserved.

Rule3

The IP address must correlate to a network number. If network numbers are different between the equipment, they cannot establish communications each other. In this case, the router is placed in the networks to make the rout- ing.

QCan I control the projector by using the telnet application?

APossible. Please refer to the item "Use of telnet" (☞ p.48 - 49).

QWhat is the MAC address assigned to the projector?

AThe MAC address is displayed in "Network information" menu of the projector (☞ p.14) and in "Information" menu through the web browser (☞ p.42).

58

Image 58

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationAddress ComplianceFederal Communications Commission Notice Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersUse of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN codeNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Enter Smtp password. up to 63 characters Mail settingEnter e-mail address of administrator Enter Port number of the Smtp server. from 1 toSetting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Setting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalTrap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation windowAbout projector condition Status DescriptionControl InputSystem Input signal are listedInput signal are listed Auto is fixed at the Scart inputSound Suppresses the sound. ON, OFFImage adjustment PC adjustment Screen setting Setting up the projectorSee the next page for the description of other functions Setting Ment mode Ready, Shutdown, OFF if Power OutSets into the selected power manage Input signal is interrupted and noInformation Items DescriptionIndication of the lamp status StatusControlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hallControl Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KV8AC