Sanyo PDG-DXL2000 owner manual Setting

Page 40

Chapter 4 Controlling the Projector

Continue from the previous page.

Item

Description

 

 

 

Ceiling

Sets the image top/bottom and left/

Rear

right reversed. (ON, OFF)

Sets the image left/right reversed. (ON,

Colorboard

OFF)

Sets the similar color of the wall or the

Reset

school blackboard. {OFF, Red, Yellow, Blue, Green, Blackboard(Green)}

Resets the Screen settings.

Setting 1

Item

Description

Language

Sets the language display of projector's

Auto setup

on-screen display menu.

Executes the Auto PC Adj, and Input

 

Search function below according to

 

the each setting after clicking Start

 

button.

Auto PC adj

Sets Auto PC Adjustment mode. (ON,

 

OFF)

Input search

Sets the auto-input signal detection

3D setting

mode. (ON1, ON2, OFF)

Sets 3D display functions.

3D

Starts 3D projection. (ON, OFF, NVIDIA

 

3D VISION)

*When selecting NVIDIA 3D VISION mode, the other menus 3D sync, 3D->2D, 3D phase setting are not necessary. (displayed "---")

3D sync

Switches the 3D sync to 1 or 2 if you see a discrete or overlapping 3D image.

 

{1(=default), 2(=inverted)}

3D-->2D

Sets the 2D mode when viewing 3D contents without 3D glasses. (ON, OFF)

3D phase

Adjusts the 3D sync output signal from the projector to external emitter system.

Zoom

(0-31)

Sets reset or store the adjustment value with ZOOM+/– buttons on the projector.

Background

(Reset, Store1, Store2)

Sets the screen background when no signal input. (Blue, User, Black)

Display

Switches on or off the on-screen menu display on the screen. (OFF, Countdown off,

 

ON)

Countdown off....... Displays input image instead the countdown during the startup.

Logo

Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

40

Image 40
Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission NoticeAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersUse of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN codeNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the displaySub menu tab Switches the sub menu tab Main menu SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting Network PIN code setting PJLink and password settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Mail setting Enter e-mail address of administratorEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 toSetting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Setting POP server Error message for sending alert mailExamples Type and contents of alert mail Snmp setting Enter community name to send Trap. Default name is publicPJ information Enter user name of the projector etc. optionalTrap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Power control and status check Service in needDisplays the status of the projectors power. Refer to next Popup confirmation windowAbout projector condition Status DescriptionControl InputInput signal are listed Input signal are listedSystem Auto is fixed at the Scart inputSound Suppresses the sound. ON, OFFImage adjustment PC adjustment Screen setting Setting up the projectorSee the next page for the description of other functions Setting Power Out Sets into the selected power manageMent mode Ready, Shutdown, OFF if Input signal is interrupted and noInformation Items DescriptionIndication of the lamp status StatusControlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hallControl Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KV8AC