Sanyo PDG-DXL2000 owner manual Flow of installation, Connect the LAN and set the configuration

Page 9

Flow of installation

Flow of installation

To use the projector via the networks, follow the setup procedures below.

STEP 1 Connect the LAN and set the configuration.

Decide depending on the LAN environment.

➔“2. Setup Procedures” (pp.11–16).

Detailed LAN configurations need to be done with a browser later.

First, complete the Wired LAN connection between computers and projec- tors, then start browser configurations.

➔“3. Basic setting and operation” (pp.17–30).

STEP 2 Network Configuration has completed.

Follow each chapter to operate the projector.

■Operate and manage the projector ➔ “4. Controlling the projector”(pp.31-44)

➔“Power Control and status check”(pp.32-33)

➔“Control”(pp.34-37)

➔“PC adjustment”(p.38)

➔“Setting up the projector”(p.39-41)

➔“Projector information”(pp.42-43)

ENGLISH

Image 9

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Network configuration Displays the selected LAN modeSets Dhcp configuration ON/OFF Enter e-mail address of administrator Mail settingEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 toSetting Smtp server and administrator address Setting Smtp authenticationRegistering and deleting E-mail addresses Error message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlInput signal are listed Input signal are listedSystem Auto is fixed at the Scart inputSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment Setting up the projector Screen settingSee the next page for the description of other functions Setting Sets into the selected power manage Power OutMent mode Ready, Shutdown, OFF if Input signal is interrupted and noItems Description InformationStatus Indication of the lamp statusControlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KV8AC