Operating
Adjusting the zoom and focus | Focus knob | Zoom knob |
|
|
1. Use the zoom knob to adjust the screen size.
2. Use the focus knob to focus the picture.
Using the automatic adjustment feature
1. Press the AUTO button (remote control).
The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.
At a computer signal
The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
POWER LIGHT
OPT BLK MODE MEMORY
ASPECT IRIS
ENTER
MENU RESET
BRIGHT CONTRAST COLOR
DVI PC AUTO
DVI PC AUTO
COMPO
At a video signal
The video format best suited for the respective input signal will be selected automatically.
This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of the INPUT menu (24). For a component video signal, the signal type is identifi ed automatically independently of this function.
Improving the contrast ratio
1. Press the IRIS button (remote control).
A dialog will appear on the screen to aid you in adjusting the iris.
2. Use the cursor buttons ▲/▼ (remote control/ projector) to adjust the iris.
3. Press the IRIS button again to close the dialog and complete this operation.
Even if you don't do anything, the dialog will automatically disappear after about 5 seconds.
POWER | LIGHT |
OPT BLK MODE | MEMORY |
ASPECT | IRIS |
ENTER |
|
MENU | RESET |
BRIGHT CONTRAST COLOR
DVI PC AUTO
COMPO
OPT BLK MODE MEMORY
ASPECT IRIS
14