Troubleshooting
Troubleshooting
Related messages
When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.
Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.
Message | Description | |
CHANGE THE LAMP | The time the lamp timer has counted is approaching | |
2000 hours. | ||
| ||
AFTER REPLACING LAMP, | Preparation of a new lamp, and an early lamp change is | |
RESET THE LAMP TIMER. | recommended. After you have change the lamp, please be | |
sure to reset the lamp timer. | ||
| ||
|
| |
CHANGE THE LAMP | The time the lamp timer has counted is approaching | |
| 2000 hours, so a lamp change within ** hours is | |
AFTER REPLACING LAMP, | recommended. | |
RESET THE LAMP TIMER. | When lamp usage reaches 2000 hours, the power will | |
| automatically be turned off. Please change the lamp by | |
THE POWER WILL TURN OFF | referring to the section “Lamp”. After you have changed the | |
AFTER ** hr. | lamp, please be sure to reset the lamp timer. | |
|
| |
CHANGE THE LAMP | As the time the lamp timer has counted has reached | |
| ||
AFTER REPLACING LAMP, | 2000 hours, the power will soon be automatically | |
RESET THE LAMP TIMER. | turned off. | |
| Please immediately turn the power off, and change the lamp | |
THE POWER WILL TURN OFF | by referring to the section “Lamp”. After changing the lamp, | |
AFTER 0 hr. | please be sure to reset the lamp timer. | |
|
| |
NO INPUT IS DETECTED | There is no input signal. | |
Please confi rm the signal input connection, and the status | ||
ON *** | ||
of the signal source. | ||
| ||
|
| |
| (This table is continued to the following page.) |
ENGLISH
NOTE • A lamp has a fi nite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic
35