Hitachi PJ-TX100 user manual Image Menu, Auto Adjust

Page 23

Multifunctional settings

IMAGE Menu (continued)

Item

Description

 

 

 

ENGLISH

 

memo This item can be selected only at a RGB signal.

 

Adjust the horizontal size using the ▲/▼ buttons. :

 

 

Large ￿ Small

 

H SIZE

memo When this adjustment is excessive, the picture may not be

 

 

 

 

displayed correctly. In such a case, please reset the adjustment

 

 

pressing the RESET button during this operation.

 

 

 

 

 

Pressing the ► (or the ENTER) button performs the automatic

 

 

adjustment.

 

 

￿At a RGB signal

 

 

The vertical position (V POSITION), the horizontal position (H

 

 

POSITION), the clock phase (H PHASE) and the horizontal size (H

 

 

SIZE) will be automatically adjusted.

 

 

memo Make sure that the application window is set to its maximum

 

 

size prior to attempting to use this feature. Dark pictures may still

 

 

be incorrectly adjusted. Use a bright screen when adjusting.

 

 

￿At a video signal

 

AUTO ADJUST

The signal type mode best suited for the respective input signal will

 

be selected automatically.

 

 

 

 

memo This function is available only when the AUTO is selected

 

 

to the item“VIDEO FORMAT” of the INPUT menu. For a component

 

 

video signal, the signal type is identified automatically independently

 

 

of this function.

 

 

memo This operation requires approximately 10 seconds, and the

 

 

message“AUTO IN PROGRESS” is displayed during the operation.

 

 

memo This operation may not work well at some signals. If the

 

 

picture becomes unstable (ex. a irregular picture, a color lack),

 

 

please select the suitable mode to the item “VIDEO FORMAT” of

 

 

the INPUT menu.

 

 

 

 

23

Image 23
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents About contents of package Fastening the lens cover Projector Part namesMode button Remote controlAt 43 screen size Setting upArrangement At 169 screen sizeAdjusting the projectors elevator Using the lens shift dialsAbout Plug-and-Play capability Connecting your devicesRS-232C DVI out Putting batteries Connecting power supplyRemote control Light Using the Light buttonUsing the remote control Turning off the power Power on/offTurning on the power Selecting an aspect ratio Selecting an input signalOperating Improving the contrast ratio Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting a black image Selecting a mode of picture typeRecalling your adjustment Adjusting the picture brightness, contrast, colorEasy Menu Multifunctional settingsUsing the menu function MenuEasy Menu Color Temp Picture MenuGamma CustomMY Memory Picture MenuSharpness ProgressiveCustom Gamma adjustment Position PhaseImage Menu Over ScanImage Menu Auto AdjustVideo Format Input MenuColor Space ComponentInformation Input MenuNormal Hinvert Vinvert H&VINVERT Setup MenuNormal Whisper IrisStart UP Screen MenuMenu Position OSD BrightMessage How to register your picture as the MyScreenScreen Menu Lamp Time Option MenuAuto OFF Fanspeed ServiceFactory Reset Option MenuLamp Warning High Voltage MaintenanceLamp Case of replacement by yourselfNJ09452 Air filterTo replace the air filter Caring for the lens Caring for the cabinet and remote controlInside of the projector Related messages TroubleshootingHorizontal or vertical wavelength of the inputted Internal portion temperature is risingSignal is outside of the response parameters of this unit Related messagesRegarding the indicator lamps Regarding the indicator lamps These has not been properly fixed Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedPhenomena that may easily be mistaken for machine defects Video input ports SpecificationRGB input ports Control port Control DVI-DPage Contents of package Arrangement Adjusting the projectors elevatorConnecting your devices Putting batteries into the remote control Connecting the power supplyVideo PowerSTANDBY/ON Lamp Lamp replacement Air filter