Hitachi PJ-TX100 user manual Screen Menu, Menu Position, OSD Bright, Start UP

Multifunctional settings

SCREEN Menu		MENU [RGB]		:SELECT
		PICTURE	LANGUAGE	ENGLISH
		IMAGE	MENU POSITION
With the SCREEN menu, the items shown in the table below		INPUT	OSD BRIGHT	5
		SETUP	START UP	ORIGINAL
can be performed. Perform each operation in accordance		SCREEN	MyScreen
		OPTION	MyScreen Lock	TURN OFF
with the instructions in the table below.		EASY MENU	MESSAGE	TURN ON
Item	Description

Select a menu language using the ▲/▼ buttons. :

ENGLISH ￿ FRANÇAIS ￿ DEUTSCH ￿ ESPAÑOL ￿ ITALIANO

LANGUAGE	NORSK ￿ NEDERLANDS ￿ PORTUGUÊS ￿		￿
	￿ SVENSKA ￿	￿ SUOMI ￿ POLSKI
	Adjust the menu position using the ▲/▼/◄/► buttons.:
	Up
	￿
MENU POSITION	Left ￿ ￿ Right
	￿
	Down
	To quit the operation, press the “MENU” button or keep no operation
	for 50 seconds.
	Select a brightness level of the OSD on the screen using the ▲/▼
OSD BRIGHT	buttons. :
	BRIGHT ￿ DARK
	Select a type of the START UP screen using the ▲/▼ buttons. :
	MyScreen ￿ ORIGINAL ￿ TURN OFF
	The START UP screen is the screen, which is displayed by
	detecting no signal or an unsuitable signal.
	The MyScreen is the screen you can register a desired screen, and
START UP	the ORIGINAL is the existing standard screen. When the TURN
	OFF is selected, the BLUE is used.
	memo The MyScreen and the ORIGINAL Screen will each change
	to a non-patterned (plain) black color screen several minutes after
	being displayed.
	memo About the MyScreen, please refer to the item “MyScreen” in
	this table.
My Screen	Pressing the ► (or the ENTER) button starts the MyScreen
	registration. Please see the fl ow chart on the following page.
	Select the TURN ON or the TURN OFF using the ▲/▼ buttons. :
My Screen Lock	TURN ON ￿ TURN OFF
	The TURN ON disables the operation of the item “MyScreen” of this
	SCREEN menu.

ENGLISH

27