Hitachi PJ-TX100 user manual About contents of package Fastening the lens cover

Page 3

Projector features / Preparations

Projector features

This projector is used to project various computer signals as well as NTSC/PAL/ SECAP video signals onto a screen. Little space is required for installation and large images can easily be realized.

This is the entertainment projector that will turn your room into a high deﬁnition theater!

Super focus ED (Extra-low dispersion) lenses are adopted for the highest possible image quality.

720P wide LCD panels realize faithful reproduction of high-deﬁ nition images.

Motorized iris control is provided for realizing ﬁ lm-like images with blacker black.

1.6x zoom lens and the optical lens shift allow ﬂ exible installation and viewing position.

Preparations

About contents of package

Please see the "Contents of package" of the "User's manual - Quick guide". Your projector should come with the items shown there. Contact immediately your dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part.

Fastening the lens cover

To avoid losing, please fasten the lens cover to the projector using the strap. 1. Fix the strap to the strap ring of lens cover.

		Strap ring
Strap ring		Strap ring

Strap

ENGLISH

2.

3.

Put the strap into the groove on rivet.

Push the rivet into the strap hole.	Bottom side	Strap hole
		Strap hole

3

Image 3

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Fastening the lens cover Projector Part namesMode button Remote controlAt 43 screen size Setting upArrangement At 169 screen sizeAdjusting the projectors elevator Using the lens shift dialsAbout Plug-and-Play capability Connecting your devicesRS-232C DVI out Connecting power supply Remote controlPutting batteries Using the Light button Using the remote controlLight Power on/off Turning on the powerTurning off the power Selecting an input signal OperatingSelecting an aspect ratio Adjusting the zoom and focus Using the automatic adjustment featureImproving the contrast ratio Adjusting a black image Selecting a mode of picture typeRecalling your adjustment Adjusting the picture brightness, contrast, colorEasy Menu Multifunctional settingsUsing the menu function MenuEasy Menu Color Temp Picture MenuGamma CustomMY Memory Picture MenuSharpness ProgressiveCustom Gamma adjustment Position PhaseImage Menu Over ScanImage Menu Auto AdjustVideo Format Input MenuColor Space ComponentInformation Input MenuNormal Hinvert Vinvert H&VINVERT Setup MenuNormal Whisper IrisStart UP Screen MenuMenu Position OSD BrightHow to register your picture as the MyScreen Screen MenuMessage Option Menu Auto OFFLamp Time Fanspeed ServiceFactory Reset Option MenuLamp Warning High Voltage MaintenanceLamp Case of replacement by yourselfAir ﬁlter To replace the air ﬁlterNJ09452 Caring for the cabinet and remote control Inside of the projectorCaring for the lens Related messages TroubleshootingHorizontal or vertical wavelength of the inputted Internal portion temperature is risingSignal is outside of the response parameters of this unit Related messagesRegarding the indicator lamps Regarding the indicator lamps These has not been properly ﬁxed Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedPhenomena that may easily be mistaken for machine defects Video input ports SpeciﬁcationRGB input ports Control port Control DVI-DPage Contents of package Arrangement Adjusting the projectors elevatorConnecting your devices Putting batteries into the remote control Connecting the power supplyPower STANDBY/ONVideo Lamp Lamp replacement Air ﬁlter