Hitachi PJ-TX100 user manual Screen Menu, How to register your picture as the MyScreen, Message

Multifunctional settings

SCREEN Menu (continued)

Item	Description
	Select the TURN ON or the TURN OFF using the ▲/▼ buttons. :
	TURN ON ￿ TURN OFF
	When the TURN ON is selected, the following message function
	works.
	The message of the “AUTO IN PROGRESS” for the auto
	adjustment.
MESSAGE	The message of the ”NO INPUT IS DETECTED”
	The message of the ”SYNC IS OUT OF RANGE”
	The message of the “Detecting …”
	The indication of the input signal by input change.
	The indication of the aspect ratio by changing the aspect ratio.
	The indication of “IRIS”, “BRIGHT”, “CONTRAST”, “COLOR” by
	adjusting them.

How to register your picture as the MyScreen

MyScreen is pointed on the SCREEN menu. Press thebutton

The MyScreen menu appears.

Do you capture the picture from

the current screen?

MyScreen

Do you start capturing this picture?

RESET :NO ENTER :YES

NO: Press the RESET button

If the RESET
button is pressed ...	YES: Press the ENTER button

The picture freeze and the frame for capturing appears.

Move the frame to the position of the picture

which you want to use, using ///buttons,

and press the ENTER button to register.

MyScreen

Move the capture area

as you want.

RESET :RETURN ENTER :NEXT

Registering.

It takes about 1~2 minute to register.

Just when the picture registration is completed

the registered screen and

the message of the right is displayed for a few seconds.

My Screen

45%

MyScreen registration is finished.

If the picture registration failed,

the message of the right is displayed for a few seconds.

A capturing error has occurred.

Please try again.

28