NEC 151944 Mounting of Line/Trunk Card on 1000 IVS PIM, LTC Connector Accommodation 1000 IVS

2.2.7 Mounting of Line/Trunk Card on 1000 IVS PIM

Mount the Line/Trunk cards in the following slots on the Remote PIM. Connect the line cables referring to Figure

3-24through Figure 3-26and Table 3-9.
LT00	LT01	LT02	LT03	LT04	LT05	LT06	LT07	LT08
			*1
Remote PIM								*2	P
									W
									R
	LTC0				LTC1
LINE/TRUNK
CARD
					BWB
								FRONT

*1 When providing DAIB card only (Max. 23 ports): LT01~LT03slot

*2 When providing one DAIB card and one DAIC card (Max. 4 ports): LT00~LT08 slot (Mounted DAIB in MP, mountedDAIC in LT07 so LT 08 is available for 8 ports card)

*3 When DAIC is mounted in slot 07, slot 06 must use the 4-port Line/Trunk card, so that the last 4 ports of slot 06 do not interfere with the DAIC card and when DK00 can assign on this last 4-ports, the system can have a Max. of 44 ports.

Note 1: The CSI card can not be used on the Remote PIM.

Note 2: One port of the last 24 ports can not be used for line/trunk, because it is used for control signaling channel.

Figure 3-24 Mounting Location of Line/Trunk Card (1000 IVS)

Table 3-9 LTC Connector Accommodation (1000 IVS)

REMOTE PIM TYPE	LTC CONNECTOR	CARD SLOT NUMBER
1000 IVS	LTC0	LT01~LT03
(48 Port PIM)
	LTC1	LT04~LT08, LT00

CHAPTER 3 ND-46550 (E)

Page 48

Revision 2.0