NEC 151944 system manual PFT0 Connector

• Install the PZ-8PFTA card to the PIM according to the following steps.

STEP 1: Connect the champ connectors of 25-pair cables to the PFT0 and PFT1 connectors on the PZ-8PFTA card as shown in Figure 3-33.Then, secure them to each other using screws and tie wraps.

				PFT0 CONNECTOR
TO MDF		+
(See STEP 3:)			+				PFT1 CONNECTOR
					+
						+		PZ-8PFTA
	25-PAIR CABLE

CHAMP CONNECTOR (Provided with PZ-8PFTA)

Figure 3-33 Connection of 25-Pair Cable and PZ-8PFTA

ND-46550 (E)CHAPTER 3

Page 57

Revision 2.0