Kodak DP2000 manual FCC Warning, Canada, Safety Certifications, EN 55022 Warning

Page 3

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Safety Certifications

UL, CUL, TÜV, NOM

EN 55022 Warning

This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.

Declaration of Conformity

Manufacturer: Eastman Kodak Company

Rochester, New York 14650 USA

We declare under our sole responsibility that the KODAK DP2000 Digital Projector conforms to the following directives and norms:

Directive 89/336/EEC, Amended by 93/68/EEC

EMI: EN 55022 (1992) Class A

EMC: EN 50082-1 (1992)

IEC 801-2, IEC 801-3, IEC 801-4

Directive 73/23/EEC, Amended by 93/68/EEC

Safety: EN 60950: 1992 + A1 + A2 + A3: 1995

July, 1999

Australian Certification C-tick mark

Image 3

Contents User’s Guide KODAK DP2000 Digital Projector with KODAK Image Manager SoftwarePage EN 55022 Warning Safety CertificationsFCC Warning CanadaPage Using the Projector Table of ContentsSafety Instructions Setting up the ProjectorAppendix D Appendix AAppendix B Appendix CSafety Instructions Safety DefinitionsSafety Symbols Important Operating Considerations Safety TermsBattery Use Page Image Resolution IntroductionCompatibility Unpacking the Projector User’s Guide , Quick Start Guideand Online User Guide CD Usage Guidelines Projector FeaturesOnline Services If You Need AssistanceFaxed Information Customer Support Warranty Positioning the Projector Setting up the ProjectorConnecting to a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a computerIf your computer has a PS/2 connector, use the PS/2 mouse cable To connect to a video player Connecting to a Video Player4. Plug the other end of the audio adapter into the audio cable Starting the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector simulates the left mouse button The Remote ControlUsing the Projector disk mouse simulates the right mouse buttonPress anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button the button on the bottom simulates your computer’s left mouse button. See “Using the Keypad and Remote Control” starting on page 23 for a description of the four function buttons Using the Keypad and Remote Control The Remote Control ButtonsThe Keypad Buttons or Computer and Video Volume keypad onlyLamp on/off keypad only MenuKHQWKHPHQXRSWLRQLVDFWLYH XVHWKHVHEXWWRQVWRQDYLJDWH WKURXJKWKHPHQXV Using the On-Screen MenusDisplay Menu BrightnessContrast Tint Audio MenuReset All VolumeImage Menu Auto ImageAuto Resize Manual Sync Manual TrackingHorizontal position Controls Menu Vertical positionVideo Standard Auto Source Select Default SourceStandby Time Rear ProjectionPlug and Play Display MessagesDisplay Startup Screen Status Menu Language MenuVertical refresh rate Computer resolutionLamp hours used Horizontal refresh rateImage Manager Settings Kodak MenuUsing the Image Manager The new contrast setting is immediately applied to the image1. Click the Kodak menu Cleaning the Lens Maintenance TroubleshootingSURMHFWRUWRRYHUKHDW Replacing the Projection Lamp6. Grasp the pull tab and lift out the lamp module Be careful when removing the lamp module so that it does not breakMaintenance & Troubleshooting 5. Loosen the two non-removable screws on the outside of the module7RUHVHWWKHODPSKRXUFRXQWHULQWKH6WDWXVZLQGRZSUHVVDQG 9. Tighten the screws on the outside of the module3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ 5HSODFHWKHODPSGRRUE\LQVHUWLQJWKHKRRNVRQWKHUHDURIWKHUsing the Kensington Lock Replacing the Batteries in the Remote ControlProblem The screen resolution is not right TroubleshootingProblem Nothing on projection screen Problem Color or text not being projectedProblem Only the start-up screen displays Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Image is “noisy” or streaked Problem Image and menus are reversed left to rightProblem the projector displays vertical lines, “bleeding” or spots Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerPage Appendix A SpecificationsDimensions WeightAudio Input Input Power RequirementsOptics LampComputer Portable and Laptop Activation ChartKey command Appendix Bde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command Computerde-activate Key commandKey command ComputerPage Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Projected Image Size Appendix DImage Size, Width and Height for DP2000-minimum image size Image Size, Width and Height for DP2000-maximum image sizeIndex L lamp H helpPage Page APPLICATION SUPPORT WARRANTY TIME PERIODWARRANTY REPAIR COVERAGE LIMITATIONSHOW TO OBTAIN SERVICE Page 9/99 Eastman Kodak Company 343 State Street Rochester, New YorkKodak is a trademark of Eastman Kodak Company PN 3H7969