Kodak DP2000 manual Display Menu, Brightness, Contrast

Page 32

Display Menu

User’s Guide KODAK DP2000 Digital Projector

Some submenus, such as Brightness, consist of a slider bar you use to increase or decrease a value. Some submenus, such as Standby Time, consist of options you scroll through to select the desired one. All changes are saved when you close the menus.

To access another menu, use the up and down navigation buttons or the disk mouse on the remote control to move back to the top of the current menu, then use the left and right navigation buttons to move to another menu.

Display Menu

Brightness

Adjusting the brightness changes the intensity of the image.

•Press the left navigation button to darken the image.

•Press the right navigation button to lighten the image.

Contrast

Contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.

•Press the left navigation button on the keypad to decrease the contrast.

•Press the right navigation button on the keypad to increase the contrast, making the blacks appear blacker and the whites appear whiter.

26

Image 32

Contents with KODAK Image Manager Software User’s Guide KODAK DP2000 Digital ProjectorPage Safety Certifications FCC WarningCanada EN 55022 WarningPage Table of Contents Safety InstructionsSetting up the Projector Using the ProjectorAppendix A Appendix BAppendix C Appendix DSafety Symbols Safety InstructionsSafety Definitions Safety Terms Important Operating ConsiderationsBattery Use Page Compatibility Image ResolutionIntroduction and Online User Guide CD Unpacking the ProjectorUser’s Guide , Quick Start Guide Projector Features Usage GuidelinesFaxed Information Online ServicesIf You Need Assistance Customer Support Warranty Setting up the Projector Positioning the ProjectorConnecting the Projector Connecting to a ComputerTo connect to a computer Do you want to play your computer’s audio on the projector?If your computer has a PS/2 connector, use the PS/2 mouse cable Connecting to a Video Player To connect to a video player4. Plug the other end of the audio adapter into the audio cable Starting the Projector Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector The Remote Control Using the Projectordisk mouse simulates the right mouse button simulates the left mouse buttonPress anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button the button on the bottom simulates your computer’s left mouse button. See “Using the Keypad and Remote Control” starting on page 23 for a description of the four function buttons The Keypad Buttons Using the Keypad and Remote ControlThe Remote Control Buttons Volume keypad only Lamp on/off keypad onlyMenu or Computer and VideoUsing the On-Screen Menus KHQWKHPHQXRSWLRQLVDFWLYH XVHWKHVHEXWWRQVWRQDYLJDWH WKURXJKWKHPHQXVContrast Display MenuBrightness Audio Menu Reset AllVolume TintAuto Resize Image MenuAuto Image Horizontal position Manual SyncManual Tracking Video Standard Controls MenuVertical position Default Source Standby TimeRear Projection Auto Source SelectDisplay Startup Screen Plug and PlayDisplay Messages Language Menu Status MenuComputer resolution Lamp hours usedHorizontal refresh rate Vertical refresh rateKodak Menu Image Manager Settings1. Click the Kodak menu Using the Image ManagerThe new contrast setting is immediately applied to the image Maintenance Troubleshooting Cleaning the LensReplacing the Projection Lamp SURMHFWRUWRRYHUKHDWBe careful when removing the lamp module so that it does not break Maintenance & Troubleshooting5. Loosen the two non-removable screws on the outside of the module 6. Grasp the pull tab and lift out the lamp module9. Tighten the screws on the outside of the module 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ5HSODFHWKHODPSGRRUE\LQVHUWLQJWKHKRRNVRQWKHUHDURIWKH 7RUHVHWWKHODPSKRXUFRXQWHULQWKH6WDWXVZLQGRZSUHVVDQGReplacing the Batteries in the Remote Control Using the Kensington LockTroubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is out of focus Problem Only the start-up screen displaysProblem Image is too wide or narrow for screen Problem Image and menus are reversed left to right Problem the projector displays vertical lines, “bleeding” or spotsProblem no sound Problem Image is “noisy” or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offPage Specifications DimensionsWeight Appendix AInput Power Requirements OpticsLamp Audio InputPortable and Laptop Activation Chart Key commandAppendix B ComputerKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activatePage Using Video Mirroring with a PowerBook Computer Appendix CUsing SimulScan Appendix D Projected Image SizeImage Size, Width and Height for DP2000-maximum image size Image Size, Width and Height for DP2000-minimum image sizeIndex H help L lampPage Page WARRANTY TIME PERIOD WARRANTY REPAIR COVERAGELIMITATIONS APPLICATION SUPPORTHOW TO OBTAIN SERVICE Page Eastman Kodak Company 343 State Street Rochester, New York Kodak is a trademark of Eastman Kodak CompanyPN 3H7969 9/99