Kodak 4400, 5600, 4600 Replacing the Thermal Fuse Assembly, Installing the Thermal Fuse Assembly

Page 10

SERVICE MANUAL

Replacing the THERMAL FUSE ASSEMBLY

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Cut and remove the necessary WIRE TIES.

[4]Remove the black wire from the THERMAL FUSE ASSEMBLY on the POWER SWITCH.

[5]Remove the gray wire from the THERMAL FUSE ASSEMBLY from the POWER CORD.

[6]Loosen the Torx SCREW on the PREHEAT DUCT approximately half way.

[7]Pull the THERMAL FUSE ASSEMBLY out of hole of the LOWER LIGHT BAFFLE ASSEMBLY.

Installing the THERMAL FUSE ASSEMBLY

[1]Do the replacement procedure for the THERMAL FUSE ASSEMBLY in reverse order.

SCREW

PRE-HEAT DUCT

A100_0015GCA

A100_0015GA

THERMAL FUSE

POWER SWITCH

Replacing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Cut and remove the necessary WIRE TIES.

[4]Remove the 2 Torx SCREWS on the left side of the LOWER LIGHT BAFFLE ASSEMBLY.

[5]Loosen the Torx SCREW on the right side of the LOWER LIGHT BAFFLE ASSEMBLY approximately 1/2 way.

10	18NOV97 – SM5440-1

Image 10

Contents Kodak Carousel Projectors Table of Contents Adjusting the Focus Light Path Auto Focus Models Installing the Lower Housing Assembly Replacing the Lower Housing AssemblyReplacing the FAN Shaft Assembly Replacements and Installations Installing the FAN Shaft Assembly FAN BeltReplacing the Motor Installing the MotorScrew Motor Replacing the Worm Pulley and Mechanism Belt Installing the Worm Pulley and Mechanism Belt Worm Pulley Screw Mechanism BeltInstalling the Thermal Fuse Assembly Replacing the Thermal Fuse AssemblyReplacing the Lamp Module Receptacle Installing the Lamp Module Receptacle Plunger Assembly Replacing the Cycle Solenoid AssemblyInstalling the Cycle Solenoid Assembly Pulley ShaftInstalling the Mechanism Assembly Replacing the Mechanism AssemblyMechanism Assembly Replacing the CAM Stack Assembly and Cycle Lever Assembly Replacing the AUTO-FOCUS Bracket AssemblyInstalling the AUTO-FOCUS Bracket Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid AssemblyLift Lever Shaft Select Lever A0910010HCA Installing the CAM Stack Assembly and Cycle Lever Assembly Installing the Lamp Socket Terminal Assembly Replacing the Lamp Socket Terminal AssemblyLamp Door Replacing the Lens Mount Assembly Auto Focus Model Installing the Lens Mount Assembly Auto Focus ModelsReplacing the Lens Mount Assembly Non Auto Focus Model Installing the Lens Mount Assembly Non Auto Focus ModelInstalling the AUTO-FOCUS Switch Assembly Replacing the AUTO-FOCUS Switch AssemblyReplacing the Focus Shaft Assembly Auto Focus Models Assembly Lens Mount AssemblySwitch Clamp Lever ScrewInstalling the Focus Shaft Assembly Replacing the Focus Shaft Assembly Non Auto-Focus ModelsInstalling the Focus Shaft Assembly Adjusting the Cycle Solenoid Adjustment SpeciﬁcationMechanism Assembly BAR Adjusting the Indexer Lever Assembly Adjusting the Slide Lift Lever Power with Mechanism Out Adjusting the Slide Lift Lever MANUAL, with Mechanism OutSlide Lift Lever Guage TL-3001 Select Slide Lift Lever Guage TL-3001 Select Spring Hook TL-1165 Auto Focus Bracket Assembly Adjusting the NullAdjustment Tool AUTO-FOCUS Target Slide TL-3002Adjusting the Photocell Soldering Iron Photocell MaskFAN CAP Housing Clamp Lever PADFAN CAP AUTO-FOCUS Assembly Target SlideClamp PAD Adjusting the Dark Shutter Adjusting the Clamp PAD AssemblyScrew NUT Clamp PAD Assembly Dark Shutter Pressure PAD Worm Pulley Assembly CAM Stack Assembly Cycle Levers FANLubrication A0910022DA AUTO-FOCUS Target Slide Adjustment T-BARAUTO-FOCUS Gauge Super LubeSpecifications Grounded Power CordsPIN Remote Control Diagnostics Main Motor VoltagesPhotocell Voltages PIN Remote Cord Plug VoltagesSmall Component Board Assembly 256809 Voltages Power, Illumination, and Cooling Malfunctions Voltage Speciﬁcations General PartsSuper Lube TL-4276 Slide Transport MalfunctionsControl Cycle LeverEccentrics Lever AssemblyPower Slide Lift Lever Direction LeverFocus Malfunctions Gate Mechanism BoardCheck that the alignment of the Target Eastman Kodak Company