Kodak 4400, 4200-KK, 5600-KK, 4600-KK, 5600-J, 4200-J Slide Lift Lever Guage TL-3001 Select

Page 28

SERVICE MANUAL

SLIDE LIFT LEVER GUAGE TL-3001

SLIDE LIFT

LEVER

SELECT

LEVER (not shown)

A091_0016BCA

A091_0016BA

Adjusting the Focus Light Path - Auto Focus Models

Adjustment Speciﬁcation

Seat AUTO-FOCUS TARGET SLIDE TL-3002 on the GATE MECHANISM. Use TL-3005 or TL-1165 to bend the AUTO-FOCUS BRACKET ASSEMBLY MIRROR until the image is within the target of the TARGET SLIDE.

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Remove the PROJECTION LENS.

[3]Do the removal for the LOWER HOUSING ASSEMBLY.

Important

It is necessary to make a FAN COVER TOOL. See the Tools section.

[4]Install the FAN COVER TOOL over the FAN area and the LAMP MODULE.

[5]Energize the projector.

[6]Set the projector to the LOW LAMP position.

[7]Install the AUTO-FOCUS TARGET SLIDE TL-3002 until it is fully seated in the GATE MECHANISM.

[8]Look through the PROJECTION LENS hole and observe the focus light path on the AUTO-FOCUS TARGET SLIDE TL-3002.

[9]Check the position of the image on the AUTO-FOCUS TARGET SLIDE TL-3002.

28	18NOV97 – SM5440-1

Image 28

Contents Kodak Carousel Projectors Table of Contents Adjusting the Focus Light Path Auto Focus Models Installing the Lower Housing Assembly Replacing the Lower Housing AssemblyReplacing the FAN Shaft Assembly Replacements and Installations Installing the FAN Shaft Assembly FAN BeltReplacing the Motor Installing the MotorScrew Motor Replacing the Worm Pulley and Mechanism Belt Installing the Worm Pulley and Mechanism Belt Worm Pulley Screw Mechanism BeltInstalling the Thermal Fuse Assembly Replacing the Thermal Fuse AssemblyReplacing the Lamp Module Receptacle Installing the Lamp Module Receptacle Replacing the Cycle Solenoid Assembly Installing the Cycle Solenoid AssemblyPlunger Assembly Pulley ShaftInstalling the Mechanism Assembly Replacing the Mechanism AssemblyMechanism Assembly Replacing the AUTO-FOCUS Bracket Assembly Installing the AUTO-FOCUS Bracket AssemblyReplacing the CAM Stack Assembly and Cycle Lever Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid AssemblyLift Lever Shaft Select Lever A0910010HCA Installing the CAM Stack Assembly and Cycle Lever Assembly Installing the Lamp Socket Terminal Assembly Replacing the Lamp Socket Terminal AssemblyLamp Door Replacing the Lens Mount Assembly Auto Focus Model Installing the Lens Mount Assembly Auto Focus ModelsReplacing the Lens Mount Assembly Non Auto Focus Model Installing the Lens Mount Assembly Non Auto Focus ModelInstalling the AUTO-FOCUS Switch Assembly Replacing the AUTO-FOCUS Switch AssemblyReplacing the Focus Shaft Assembly Auto Focus Models Lens Mount Assembly SwitchAssembly Clamp Lever ScrewInstalling the Focus Shaft Assembly Replacing the Focus Shaft Assembly Non Auto-Focus ModelsInstalling the Focus Shaft Assembly Adjusting the Cycle Solenoid Adjustment SpeciﬁcationMechanism Assembly BAR Adjusting the Indexer Lever Assembly Adjusting the Slide Lift Lever Power with Mechanism Out Adjusting the Slide Lift Lever MANUAL, with Mechanism OutSlide Lift Lever Guage TL-3001 Select Slide Lift Lever Guage TL-3001 Select Adjusting the Null Adjustment ToolSpring Hook TL-1165 Auto Focus Bracket Assembly AUTO-FOCUS Target Slide TL-3002Adjusting the Photocell Soldering Iron Photocell MaskFAN CAP Housing Clamp Lever PADFAN CAP AUTO-FOCUS Assembly Target SlideClamp PAD Adjusting the Dark Shutter Adjusting the Clamp PAD AssemblyScrew NUT Clamp PAD Assembly Dark Shutter Pressure PAD Worm Pulley Assembly CAM Stack Assembly Cycle Levers FANLubrication A0910022DA Adjustment T-BAR AUTO-FOCUS GaugeAUTO-FOCUS Target Slide Super LubeSpecifications Grounded Power CordsPIN Remote Control Diagnostics Main Motor VoltagesPhotocell Voltages PIN Remote Cord Plug VoltagesSmall Component Board Assembly 256809 Voltages Power, Illumination, and Cooling Malfunctions Voltage Speciﬁcations General PartsSlide Transport Malfunctions ControlSuper Lube TL-4276 Cycle LeverLever Assembly Power Slide Lift LeverEccentrics Direction LeverFocus Malfunctions Gate Mechanism BoardCheck that the alignment of the Target Eastman Kodak Company