SERVICE MANUAL
Replacing the LAMP SOCKET TERMINAL ASSEMBLY
Style 1 LAMP SOCKET TERMINAL ASSEMBLY
SCREW
Warning
TAB (2)
LAMP DOOR
PLATE ASSEMBLY
PROJECTOR
LAMP
LAMP
EJECTOR
LAMP SOCKET
TERMINAL
ASSEMBLY
CONDENSER
LENS
HEAT ABSORBING
GLASS A091_0018CCA
A091_0018CA
Dangerous Voltage
[1]Disconnect the main power.
Important
The EXTRA BRIGHT LAMP MODULE does not have a HEAT ABSORBING GLASS and has a LABEL on the
LAMP DOOR.
[2]Remove the LAMP MODULE.
[3]Remove the PROJECTION LAMP from the LAMP MODULE.
[4]Remove the SCREW from the LAMP DOOR PLATE ASSEMBLY.
[5]Release the 2 TABS on the bottom side of the LAMP MODULE next to the LAMP MODULE DOOR.
[6]Remove the LAMP DOOR PLATE ASSEMBLY.
Caution
Remove the CONDENSER LENS and HEAT ABSORBING GLASS and set the parts on a clean cloth. Do not set on a cold surface; this will cause damage to the parts.
[7]Remove the LAMP EJECTOR.
[8]Remove the LAMP SOCKET TERMINAL ASSEMBLY.
Installing the LAMP SOCKET TERMINAL ASSEMBLY
[1]Do the replacement procedure for the LAMP SOCKET TERMINAL ASSEMBLY in reverse order.
18 | 18NOV97 – |