Kodak 5600-KK, 4400, 4200-KK Lens Mount Assembly, Clamp Lever Screw, Spring, Focus Shaft, Switch

SERVICE MANUAL

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Remove the FOCUS KNOB.

Important

It is necessary to push the AUTO-FOCUS BRACKET backward and forward to allow access to the SCREWS on the

LENS MOUNT ASSEMBLY.

[4]Remove the 3 SCREWS from the LENS MOUNT ASSEMBLY.

[5]Lift and remove the LENS MOUNT ASSEMBLY.

[6]Remove the FOCUS SHAFT SPRING from the LENS MOUNT BRACKET.

[7]Remote models only: Remove the SPRING from the CLAMP LEVER on the LENS MOUNT BRACKET.

[8]Remove the SPRING from the PHOTOCELL BRACKET.

[9]Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY.

[10]Remove the SCREW from the LENS SUPPORT BRACKET.

[11]Lift and remove the LENS SUPPORT BRACKET.

[12]Remote models: Remove the AUTO-FOCUS SWITCH ASSEMBLY.

[13]Remote models: Remove the SCREW from the RACK SOLENOID ASSEMBLY.

[14]Remote models: Remove the RACK SOLENOID ASSEMBLY and PLUNGER.

[15]Remote models: Remove the SCREW from the FOCUS MOTOR BRACKET ASSEMBLY.

[16]Remove the FOCUS MOTOR BRACKET ASSEMBLY.

[17]Push the RACK LEVER away from the FOCUS SHAFT ASSEMBLY.

[18]Remove the FOCUS SHAFT ASSEMBLY.

CLAMP LEVER	SCREW	FOCUS SHAFT
SPRING		SPRING

RACK LEVER (not shown)

FOCUS SHAFT SCREW

FOCUS MOTOR BRACKET

SPACER

E-RING

RACK SOLENOID

PLUNGER

LENS SUPPORT BRACKET

PHOTOCELL	AUTO-FOCUS
BRACKET		SCREW
	SWITCH
SPRING
	ASSEMBLY

A091_4029HCA

A091_4029HA

22 18NOV97 – SM5440-1