Kodak 4200-KK, 4400, 5600-KK, 4600-KK, 5600-J, 4200-J Installing the Lamp Module Receptacle

Page 11

Replacements and Installations

[6]Lift and remove the LOWER LIGHT BAFFLE ASSEMBLY.

[7]Lift the GRILLE ASSEMBLY up.

[8]Remove the 2 long Torx from the BLOWER COVER ASSEMBLY.

[9]Lift the BLOWER COVER ASSEMBLY up.

[10]Lift and move the PREHEAT DUCT up.

[11]To remove the LAMP MODULE RECEPTACLE from the PREHEAT DUCT, compress the 2 TABS on the LAMP MODULE RECEPTACLE.

SCREW (2)

PRE-HEAT DUCT

SCREW (2)

LOWER LIGHT BAFFLE

LAMP MODULE

RECEPTACLE

BLOWER COVER

ASSEMBLY

A100_0032HCA

A100_0032HA

SCREW (not shown)

Installing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LAMP MODULE RECEPTACLE in reverse order.

SM5440-1 – 18NOV97

11

Image 11

Contents Kodak Carousel Projectors Table of Contents Adjusting the Focus Light Path Auto Focus Models Replacing the FAN Shaft Assembly Replacing the Lower Housing AssemblyInstalling the Lower Housing Assembly Replacements and Installations FAN Belt Installing the FAN Shaft AssemblyScrew Motor Installing the MotorReplacing the Motor Replacing the Worm Pulley and Mechanism Belt Worm Pulley Screw Mechanism Belt Installing the Worm Pulley and Mechanism BeltReplacing the Lamp Module Receptacle Replacing the Thermal Fuse AssemblyInstalling the Thermal Fuse Assembly Installing the Lamp Module Receptacle Pulley Shaft Replacing the Cycle Solenoid AssemblyInstalling the Cycle Solenoid Assembly Plunger AssemblyMechanism Assembly Replacing the Mechanism AssemblyInstalling the Mechanism Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid Assembly Replacing the AUTO-FOCUS Bracket AssemblyInstalling the AUTO-FOCUS Bracket Assembly Replacing the CAM Stack Assembly and Cycle Lever AssemblyLift Lever Shaft Select Lever A0910010HCA Installing the CAM Stack Assembly and Cycle Lever Assembly Lamp Door Replacing the Lamp Socket Terminal AssemblyInstalling the Lamp Socket Terminal Assembly Installing the Lens Mount Assembly Auto Focus Models Replacing the Lens Mount Assembly Auto Focus ModelInstalling the Lens Mount Assembly Non Auto Focus Model Replacing the Lens Mount Assembly Non Auto Focus ModelReplacing the Focus Shaft Assembly Auto Focus Models Replacing the AUTO-FOCUS Switch AssemblyInstalling the AUTO-FOCUS Switch Assembly Clamp Lever Screw Lens Mount AssemblySwitch AssemblyReplacing the Focus Shaft Assembly Non Auto-Focus Models Installing the Focus Shaft AssemblyInstalling the Focus Shaft Assembly Mechanism Assembly BAR Adjustment SpeciﬁcationAdjusting the Cycle Solenoid Adjusting the Indexer Lever Assembly Slide Lift Lever Guage TL-3001 Select Adjusting the Slide Lift Lever MANUAL, with Mechanism OutAdjusting the Slide Lift Lever Power with Mechanism Out Slide Lift Lever Guage TL-3001 Select AUTO-FOCUS Target Slide TL-3002 Adjusting the NullAdjustment Tool Spring Hook TL-1165 Auto Focus Bracket AssemblyAdjusting the Photocell Photocell Mask Soldering IronClamp Lever PAD FAN CAP HousingClamp PAD AUTO-FOCUS Assembly Target SlideFAN CAP Screw NUT Clamp PAD Assembly Adjusting the Clamp PAD AssemblyAdjusting the Dark Shutter Dark Shutter Pressure PAD FAN Worm Pulley Assembly CAM Stack Assembly Cycle LeversLubrication A0910022DA Super Lube Adjustment T-BARAUTO-FOCUS Gauge AUTO-FOCUS Target SlideGrounded Power Cords SpecificationsPIN Remote Control Main Motor Voltages DiagnosticsPIN Remote Cord Plug Voltages Photocell VoltagesSmall Component Board Assembly 256809 Voltages Voltage Speciﬁcations General Parts Power, Illumination, and Cooling MalfunctionsCycle Lever Slide Transport MalfunctionsControl Super Lube TL-4276Direction Lever Lever AssemblyPower Slide Lift Lever EccentricsFocus Malfunctions Board Gate MechanismCheck that the alignment of the Target Eastman Kodak Company