PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or special damages, resulting from any use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic discharge. Use caution to prevent damage during all service procedures.
Table of Contents |
|
Description | Page |
Replacements and Installations | 4 |
Replacing the LOWER HOUSING ASSEMBLY | 4 |
Installing the LOWER HOUSING ASSEMBLY | 4 |
Replacing the FAN SHAFT ASSEMBLY | 4 |
Installing the FAN SHAFT ASSEMBLY | 6 |
Replacing the MOTOR | 7 |
Installing the MOTOR | 7 |
Replacing the WORM PULLEY and MECHANISM BELT | 8 |
Installing the WORM PULLEY and MECHANISM BELT | 9 |
Replacing the THERMAL FUSE ASSEMBLY | 10 |
Installing the THERMAL FUSE ASSEMBLY | 10 |
Replacing the LAMP MODULE RECEPTACLE | 10 |
Installing the LAMP MODULE RECEPTACLE | 11 |
Replacing the CYCLE SOLENOID ASSEMBLY | 12 |
Installing the CYCLE SOLENOID ASSEMBLY | 12 |
Replacing the MECHANISM ASSEMBLY | 13 |
Installing the MECHANISM ASSEMBLY | 13 |
Replacing the | 14 |
Installing the | 14 |
Replacing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY . . . | 14 |
Installing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY . . . . | 17 |
Replacing the LAMP SOCKET TERMINAL ASSEMBLY | 18 |
Installing the LAMP SOCKET TERMINAL ASSEMBLY | 18 |
Replacing the LENS MOUNT ASSEMBLY - Auto Focus Model | 19 |
Installing the LENS MOUNT ASSEMBLY - Auto Focus Models | 19 |
Replacing the LENS MOUNT ASSEMBLY - Non Auto Focus Model | 20 |
Installing the LENS MOUNT ASSEMBLY - Non Auto Focus Model | 20 |
Replacing the | 21 |
Installing the | 21 |
Replacing the FOCUS SHAFT ASSEMBLY - Auto Focus Models | 21 |
Installing the FOCUS SHAFT ASSEMBLY | 23 |
Replacing the FOCUS SHAFT ASSEMBLY - Non | 23 |
Installing the FOCUS SHAFT ASSEMBLY | 24 |
Adjustments | 25 |
Adjusting the CYCLE SOLENOID | 25 |
Adjusting the INDEXER LEVER ASSEMBLY | 26 |
Adjusting the SLIDE LIFT LEVER MANUAL, with MECHANISM Out | 27 |
Adjusting the SLIDE LIFT LEVER POWER with Mechanism Out | 27 |
2 | 18NOV97 – |