Kodak 4200-J, 5600 Installing the CAM Stack Assembly and Cycle Lever Assembly, Mechanism Assembly

Replacements and Installations

HALF-CYCLE

LEVER

HALF-CYCLE

LEVER SPRING

CYCLE

LEVER

PLUNGER

SPRING

PLUNGER

CYCLE

SOLENOID

SCREW (2)

INDEX LEVER

and SPRING (not shown)

E-RING (2)

A091_0009CCA

A091_0009CA

[20]Remove the 2 SCREWS from the CYCLE SOLENOID.

[21]Remove the CYCLE SOLENOID.

[22]Slide the PLUNGER and PLUNGER SPRING off the CYCLE LEVER.

[23]Remove the HALF CYCLE SPRING between the CYCLE LEVER ASSEMBLY and the HALF CYCLE LEVER.

[24]Disconnect the INDEX LEVER SPRING from the

MECHANISM ASSEMBLY.

[25]Push the INDEX LEVER back.

[26]Remove the 2 E-RINGS:

•1 on the CYCLE LEVER ASSEMBLY

•1 on the HALF CYCLE LEVER

Caution

Keep both the CYCLE LEVER ASSEMBLY and the HALF CYCLE LEVER together and observe the orientation of both LEVERS.

[27]Slide both the CYCLE LEVER and HALF CYCLE LEVER off the SHAFT.

Installing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY

Caution

Keep both the CYCLE LEVER ASSEMBLY and the HALF CYCLE LEVER together and observe the orientation of both LEVERS.

[1] Do the replacement procedure for the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY in reverse order.

SM5440-1 – 18NOV97 17