FARGO electronic Quatro ID Card Printer III. about Cards, IV. Loading Cards Into the Printer

Page 14

III. ABOUT CARDS

The Quatro ID Card Printer prints onto standard CR-80 size cards (3.375"L x 2.125"W x .030" / 86mmL x 54mmW x .75mm) which have a clean, level, polished PVC surface. Although Quatro is equipped with card cleaning rollers, it is very important to always print onto cards designed for direct-to- card, thermal printing. For this reason, a special card stock is available which is specifically designed for printing with Quatro.

This card stock provides a level, polished PVC surface free of fingerprints, dust, and any other types of embedded contaminants. In addition, this card stock is packaged and shipped in dust-free plastic bags. To order compatible card stock, contact your authorized Quatro reseller.

IMPORTANT! Never run cards with a contaminated, dull, or uneven surface through the printer. Printing onto such cards will ultimately lead to poor print quality and will greatly reduce the life of your printhead. In addition, always store your card stock in its original packaging or in a clean, dust-free environment. Do not print onto cards which have been dropped or soiled. Printheads damaged by contaminated or poor quality cards will automatically void the printheadÕs factory warranty.

IV. LOADING CARDS INTO THE PRINTER

Quatro holds a maximum of 50 CR-80 size cards in its Card Input Hopper. The printer will automatically feed each card off the top of the stack. To load the cards into the printer, refer to the following steps:

1.Open the Top Cover of the printer by gently grasping the front sides of the cover and lifting upward. The cover will tilt open from front-to-back.

10 Ribbons and Cards

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Quatro ID Card Printer UserÕs Manual Printing History Table of Contents Appendix a Magnetic Stripe Encoding Module Choosing a Good Location Getting StartedThank YOU II. about Moisture CondensationIII. Unpacking and Inspection Powering Up the Printer Applying PowerPower Input Port II. Identifying the Printer Features Ribbons and Cards About RibbonsII. Loading Ribbon Into the Printer Release Tab Printhead Assembly Take-up Ribbon Supply Ribbon Drive Hubs Ribbon Sensor III. about Cards IV. Loading Cards Into the PrinterCard Stack Card Input Tray Printing a Self Test Using the Quatro ID Card Printer Connecting the Printer to Your ComputerII. Installing the Windows Printer Driver Windows 95/98 or Windows NTWindows III. Installing the 32-BIT Print Spooler for Windows 95/98 PanelUsing the Quatro ID Card Printer IV. Setting UP the Windows Printer Driver Card Size Windows 95/98Windows NT Color Matching ControlsDither Mode Fast 32-bit SpoolerPanel Graphics No Margins Mag Encode OnlyMagnetics Position Rear of PrinterWrite Direct to Port Ribbon TypeRotate Printing a Card Maintenance Supplies RequiredII. Standard Printhead Cleaning III. Expanded Printhead Cleaning IV. Cleaning the PRINTER’S CaseCleaning the Inside of the Printer VI. Clearing a Card JAMVIII. Cleaning the Card Feed Rollers VII. Clearing a Ribbon JAMInsert this end first Sticky Side Up IX. Cleaning the Drive Roller Maintaining the Cleaning RollersMaintenance On-line LED light is flashing TroubleshootingPrinter doesn’t work at all On/cancel LED light is flashing ’m having problems printing from Windows 95/98Ribbon doesn’t seem to wind or print properly Card or ribbon is jammed Ribbon has torn or even brokenMy prints have streaks in them My prints have blotches small voids in themPrinting gets cut off or is not centered on the card Photos on my ID cards look very pixelatedCard won’t feed and the on-line LED starts blinking Two or more cards feed at the same timeTechnical Specifications Printing AreaEncoding Mode / Magnetic Track Selection Magnectic Track OptionsMagnetic Track Options Encoded Bit DensityCharacter Ascii Offset LRC Generation ModeCharacter Data Size Character Data ParityII. Track Locations III. Sending Track Information~1%JULIE ANDERSON623-85-1253? II. CENTRONICS-TYPE Parallel Interface Appendix B Interfacing InformationIntroduction Index Drive rollerRibbon type Page

Quatro ID Card Printer specifications

The FARGO Electronic Quattro ID Card Printer is a versatile and efficient solution for creating high-quality identification cards. This state-of-the-art printer is designed to cater to a variety of industries, including education, healthcare, and corporate environments, making it an ideal choice for organizations that require reliable and secure ID card printing.

One of the standout features of the Quattro ID Card Printer is its ability to produce vibrant, full-color cards with exceptional clarity. Utilizing advanced dye-sublimation technology, the printer ensures that images and text are reproduced with remarkable precision. The printer has a resolution of 300 dpi, providing sharp details and rich colors that enhance the overall appearance of the ID cards.

Another key characteristic of the Quattro printer is its dual-sided printing capability. This feature allows users to print on both sides of the card in a single pass, significantly reducing production time and enhancing productivity. Organizations can utilize the back side of the card for vital information, such as magnetic stripes, barcodes, or additional identification details.

The Quattro ID Card Printer also incorporates smart card encoding technology, which enables the printing and encoding of RFID and smart chip technology onto cards. This is particularly beneficial for organizations that require heightened security measures, as it allows for the storage of sensitive information directly on the ID card itself.

User-friendliness is another essential aspect of the FARGO Quattro ID Card Printer. The device features an intuitive interface with easy-to-navigate controls, making it accessible for operators of all skill levels. Additionally, the printer is designed for seamless integration with existing software systems, facilitating a smooth workflow.

The robust build and compact design of the Quattro printer make it suitable for a variety of settings. Its durable construction ensures longevity while occupying minimal space on a desk or workstation. Furthermore, the printer is equipped with USB and Ethernet connectivity options, providing flexibility in how it can be deployed within an organization.

In conclusion, the FARGO Electronic Quattro ID Card Printer is a powerful tool for creating secure, professional-grade identification cards. With its advanced printing technology, dual-sided printing capability, smart card encoding, and user-friendly features, it stands out as a reliable choice for organizations looking to enhance their ID card issuance processes. Whether for employee badges, student IDs, or membership cards, the Quattro printer is an excellent investment in security and quality.
Top Page Image Contents