FARGO electronic Quatro ID Card Printer manual III. Expanded Printhead Cleaning

Page 33

5.Once the printhead is completely dry, shut the Printhead Assembly and Top Cover. If a streak persists, perform the steps in Section III.

III.EXPANDED PRINTHEAD CLEANING

Perform if you have a streak on the printed output that canÕt be solved by the Standard Printhead Cleaning procedure. To maintain your printerÕs high quality of printing, this procedure should also be performed approximately every 2,500 prints as part of the printerÕs general maintenance program.

1.Open the Top Cover of the printer by gently grasping the front sides of the cover and lifting upward. The cover will tilt open from front-to-back.

2.Open the Printhead Assembly by gently pulling up on the assemblyÕs Release Tab and lifting upward. Allow the assembly to swing completely open.

3.Use a soft, lint-free cloth slightly moistened with acetone to wipe off the surface of the printhead. Be extremely careful not to use too much acetone. It must not be allowed to drip into the printer!

CAUTION! ACETONE IS A VERY POWERFUL SOLVENT. DO NOT APPLY ACETONE TO ANY OTHER AREA OF THE PRINTER, SINCE IT WILL DESTROY THE FINISH OF PAINT, RUBBER, AND PLASTIC.

4.Allow the printhead to thoroughly dry before closing the Printhead Assembly and Top Cover. If a streak persists, contact your authorized reseller for further assistance.

IV. CLEANING THE PRINTER’S CASE

Quatro has a durable casing that should retain its luster and appearance for many years. Clean it only with a soft cloth slightly moistened with water or a mild soap. Do not use excess water or cleaning solvents of any kind. Never spray the cabinet with a cleaner. Rather, spray the cloth first, then wipe down the printer.

Maintenance 29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Quatro ID Card Printer UserÕs Manual Printing History Table of Contents Appendix a Magnetic Stripe Encoding Module Thank YOU Getting StartedChoosing a Good Location II. about Moisture CondensationIII. Unpacking and Inspection Applying Power Powering Up the PrinterPower Input Port II. Identifying the Printer Features About Ribbons Ribbons and CardsII. Loading Ribbon Into the Printer Release Tab Printhead Assembly Take-up Ribbon Supply Ribbon Drive Hubs Ribbon Sensor IV. Loading Cards Into the Printer III. about CardsCard Stack Card Input Tray Printing a Self Test Connecting the Printer to Your Computer Using the Quatro ID Card PrinterWindows 95/98 or Windows NT II. Installing the Windows Printer DriverWindows Panel III. Installing the 32-BIT Print Spooler for Windows 95/98Using the Quatro ID Card Printer IV. Setting UP the Windows Printer Driver Windows 95/98 Windows NTCard Size Controls Color MatchingFast 32-bit Spooler Dither ModePanel Graphics Mag Encode Only MagneticsNo Margins Rear of Printer PositionRibbon Type RotateWrite Direct to Port Printing a Card Supplies Required MaintenanceII. Standard Printhead Cleaning IV. Cleaning the PRINTER’S Case III. Expanded Printhead CleaningVI. Clearing a Card JAM Cleaning the Inside of the PrinterVII. Clearing a Ribbon JAM VIII. Cleaning the Card Feed RollersInsert this end first Sticky Side Up Maintaining the Cleaning Rollers IX. Cleaning the Drive RollerMaintenance Troubleshooting Printer doesn’t work at allOn-line LED light is flashing ’m having problems printing from Windows 95/98 On/cancel LED light is flashingRibbon doesn’t seem to wind or print properly Ribbon has torn or even broken Card or ribbon is jammedMy prints have blotches small voids in them My prints have streaks in themCard won’t feed and the on-line LED starts blinking Photos on my ID cards look very pixelatedPrinting gets cut off or is not centered on the card Two or more cards feed at the same timePrinting Area Technical SpecificationsMagnectic Track Options Encoding Mode / Magnetic Track SelectionEncoded Bit Density Magnetic Track OptionsCharacter Data Size LRC Generation ModeCharacter Ascii Offset Character Data ParityIII. Sending Track Information II. Track Locations~1%JULIE ANDERSON623-85-1253? Appendix B Interfacing Information IntroductionII. CENTRONICS-TYPE Parallel Interface Drive roller IndexRibbon type Page

Quatro ID Card Printer specifications

The FARGO Electronic Quattro ID Card Printer is a versatile and efficient solution for creating high-quality identification cards. This state-of-the-art printer is designed to cater to a variety of industries, including education, healthcare, and corporate environments, making it an ideal choice for organizations that require reliable and secure ID card printing.

One of the standout features of the Quattro ID Card Printer is its ability to produce vibrant, full-color cards with exceptional clarity. Utilizing advanced dye-sublimation technology, the printer ensures that images and text are reproduced with remarkable precision. The printer has a resolution of 300 dpi, providing sharp details and rich colors that enhance the overall appearance of the ID cards.

Another key characteristic of the Quattro printer is its dual-sided printing capability. This feature allows users to print on both sides of the card in a single pass, significantly reducing production time and enhancing productivity. Organizations can utilize the back side of the card for vital information, such as magnetic stripes, barcodes, or additional identification details.

The Quattro ID Card Printer also incorporates smart card encoding technology, which enables the printing and encoding of RFID and smart chip technology onto cards. This is particularly beneficial for organizations that require heightened security measures, as it allows for the storage of sensitive information directly on the ID card itself.

User-friendliness is another essential aspect of the FARGO Quattro ID Card Printer. The device features an intuitive interface with easy-to-navigate controls, making it accessible for operators of all skill levels. Additionally, the printer is designed for seamless integration with existing software systems, facilitating a smooth workflow.

The robust build and compact design of the Quattro printer make it suitable for a variety of settings. Its durable construction ensures longevity while occupying minimal space on a desk or workstation. Furthermore, the printer is equipped with USB and Ethernet connectivity options, providing flexibility in how it can be deployed within an organization.

In conclusion, the FARGO Electronic Quattro ID Card Printer is a powerful tool for creating secure, professional-grade identification cards. With its advanced printing technology, dual-sided printing capability, smart card encoding, and user-friendly features, it stands out as a reliable choice for organizations looking to enhance their ID card issuance processes. Whether for employee badges, student IDs, or membership cards, the Quattro printer is an excellent investment in security and quality.
Top Page Image Contents