FARGO electronic Quatro ID Card Printer manual Windows

Page 19

4.Follow the on-screen instructions to complete installation. When prompted, do not have Windows print a test print, since you most likely performed a printer self test in Chapter 3. Once installed, the ÒColor ID Card QuatroÓ printer icon will appear in the Printers folder.

NOTE: Occasionally, new printer driver versions are released which have new or updated features. Before installing an updated printer driver version, always delete the existing printer driver version from your system. To do this, simply select the printer driver icon from within the Printers folder, and press the Delete key. A message may appear saying, ÒSome files were used only for this printer and are no longer needed. Would you like to delete these files now?Ó If you have FargoColor and/or the 32-Bit Print Spooler installed, select NO. If none of these applications apply, select YES.

Windows 3.1x:

To install the printer driver into Windows 3.1x, refer to the following:

1.After starting Windows, go to the Main program group and select Control Panel.

2.From the Control Panel, select Printers.

3.Select Use Print Manager from the bottom left of the Printers window.

4.Select the Add>> button.

5.Highlight the Install Unlisted or Updated Printer option from List of Printers.

6.Select the Install button.

7.Insert the supplied Printer Driver diskette into your computerÕs disk drive. If you insert the diskette in a drive other than the A: drive displayed in the Install Driver dialog box, you must change the drive designation. Select the OK button.

8.ÒColor ID Card QuatroÓ should now be listed in the Add Unlisted or Updated Printer dialog box. Select the OK button. Your PCÕs disk drive will now load the printer driver. Depending upon your computer, loading will take about 10 to 20 seconds.

Using the Quatro ID Card Printer 15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Quatro ID Card Printer UserÕs Manual Printing History Table of Contents Appendix a Magnetic Stripe Encoding Module II. about Moisture Condensation Getting StartedThank YOU Choosing a Good LocationIII. Unpacking and Inspection Applying Power Powering Up the PrinterPower Input Port II. Identifying the Printer Features About Ribbons Ribbons and CardsII. Loading Ribbon Into the Printer Release Tab Printhead Assembly Take-up Ribbon Supply Ribbon Drive Hubs Ribbon Sensor IV. Loading Cards Into the Printer III. about CardsCard Stack Card Input Tray Printing a Self Test Connecting the Printer to Your Computer Using the Quatro ID Card PrinterWindows 95/98 or Windows NT II. Installing the Windows Printer DriverWindows Panel III. Installing the 32-BIT Print Spooler for Windows 95/98Using the Quatro ID Card Printer IV. Setting UP the Windows Printer Driver Windows NT Windows 95/98Card Size Controls Color MatchingFast 32-bit Spooler Dither ModePanel Graphics Magnetics Mag Encode OnlyNo Margins Rear of Printer PositionRotate Ribbon TypeWrite Direct to Port Printing a Card Supplies Required MaintenanceII. Standard Printhead Cleaning IV. Cleaning the PRINTER’S Case III. Expanded Printhead CleaningVI. Clearing a Card JAM Cleaning the Inside of the PrinterVII. Clearing a Ribbon JAM VIII. Cleaning the Card Feed RollersInsert this end first Sticky Side Up Maintaining the Cleaning Rollers IX. Cleaning the Drive RollerMaintenance Printer doesn’t work at all TroubleshootingOn-line LED light is flashing ’m having problems printing from Windows 95/98 On/cancel LED light is flashingRibbon doesn’t seem to wind or print properly Ribbon has torn or even broken Card or ribbon is jammedMy prints have blotches small voids in them My prints have streaks in themTwo or more cards feed at the same time Photos on my ID cards look very pixelatedCard won’t feed and the on-line LED starts blinking Printing gets cut off or is not centered on the cardPrinting Area Technical SpecificationsMagnectic Track Options Encoding Mode / Magnetic Track SelectionEncoded Bit Density Magnetic Track OptionsCharacter Data Parity LRC Generation ModeCharacter Data Size Character Ascii OffsetIII. Sending Track Information II. Track Locations~1%JULIE ANDERSON623-85-1253? Introduction Appendix B Interfacing InformationII. CENTRONICS-TYPE Parallel Interface Drive roller IndexRibbon type Page

Quatro ID Card Printer specifications

The FARGO Electronic Quattro ID Card Printer is a versatile and efficient solution for creating high-quality identification cards. This state-of-the-art printer is designed to cater to a variety of industries, including education, healthcare, and corporate environments, making it an ideal choice for organizations that require reliable and secure ID card printing.

One of the standout features of the Quattro ID Card Printer is its ability to produce vibrant, full-color cards with exceptional clarity. Utilizing advanced dye-sublimation technology, the printer ensures that images and text are reproduced with remarkable precision. The printer has a resolution of 300 dpi, providing sharp details and rich colors that enhance the overall appearance of the ID cards.

Another key characteristic of the Quattro printer is its dual-sided printing capability. This feature allows users to print on both sides of the card in a single pass, significantly reducing production time and enhancing productivity. Organizations can utilize the back side of the card for vital information, such as magnetic stripes, barcodes, or additional identification details.

The Quattro ID Card Printer also incorporates smart card encoding technology, which enables the printing and encoding of RFID and smart chip technology onto cards. This is particularly beneficial for organizations that require heightened security measures, as it allows for the storage of sensitive information directly on the ID card itself.

User-friendliness is another essential aspect of the FARGO Quattro ID Card Printer. The device features an intuitive interface with easy-to-navigate controls, making it accessible for operators of all skill levels. Additionally, the printer is designed for seamless integration with existing software systems, facilitating a smooth workflow.

The robust build and compact design of the Quattro printer make it suitable for a variety of settings. Its durable construction ensures longevity while occupying minimal space on a desk or workstation. Furthermore, the printer is equipped with USB and Ethernet connectivity options, providing flexibility in how it can be deployed within an organization.

In conclusion, the FARGO Electronic Quattro ID Card Printer is a powerful tool for creating secure, professional-grade identification cards. With its advanced printing technology, dual-sided printing capability, smart card encoding, and user-friendly features, it stands out as a reliable choice for organizations looking to enhance their ID card issuance processes. Whether for employee badges, student IDs, or membership cards, the Quattro printer is an excellent investment in security and quality.
Top Page Image Contents