E - 8 | Connection to Your Personal Computer |
Connection to Your Personal Computer
The MultiSync E1100 color monitor complements NEC computers, PC compatibles, Macintosh and Macintosh compatibles.
For the PC:
Your system has one of two configurations:
–the video controller is built into the computer
–the video controller is in the form of a display card (sometimes referred to as the graphics card, video adapter or graphics board)
Both configurations have a video connector (or a CRT PORT on laptop computers). If you are not sure which port is the video connector, please consult your computer or display card manual.
For the Mac:
With the optional MultiSync E1100 Macintosh Cable Adapter, the MultiSync E1100 color monitor is compatible with Macintosh computers, as well as Macintosh clones.
NOTE: Power Macintosh 6100/60 users need to use the Apple
The MultiSync E1100 Macintosh Cable Adapter allows you to change between 640 x 480, 832 x 624, 1024 x 768 and 1152 x 870 screen resolutions without restarting your system, if the video port supports these modes. You will connect your MultiSync E1100 monitor one of two ways to your Macintosh computer:
–
–NuBus, PDS or PCI display card
Both configurations should have the same style video connector. If you are not sure which port is the video connector, please consult your computer or display card manual.
Please contact your local dealer for information about the Mac Adapter.