NEC E1100 user manual Recommended use

E - 6 Recommended use

–Keep the monitor away from high capacity transformers, electric motors and other devices which may create strong magnetic fields.

–Use the monitor in a clean, dry area.

–Handle with care when transporting.

–We recommend to adjust the brightness in a way that the background raster disappears.

–For ergonomical reasons we recommend not to use the position of the maximum contrast control.

–For ergonomical reasons the preset size and position is recommended with the standard signals.

–For ergonomical reasons preset side-pincushion setting is recommended.

–For ergonomical reasons we recommend using non-interlaced signals with a vertical refresh rate between 75 and 120 Hz.

–For ergonomical reasons we recommend not to use the primary colour blue on dark background ( it is difficult to recognise and produces eye fatigue due to insufficient contrast).

–To separate the equipment from the power source you have to remove the plug from the inlet socket.

–The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

–We recommend using the power cord supplied with the monitor. However, if another type of power cord is required, power cord H05VV-F should be used except in U.K.

–To clean the CRT surface use a lint-free, non-abrasive cloth and a neutral cleaner based, non-abrasive cleaning solution or glass cleaner for best results.