NEC E1100 user manual GlobalSync, ErgoDesign, Power Manager

E - 2 Introduction

system its identification and capabilities. The system will then select its highest resolution and refresh rate to take advantage of your MultiSync monitor.

GlobalSync

The GlobalSync control of the MultiSync E1100 also minimises any effects of the earths magnetic field on screen performance.

ErgoDesign

The MultiSync ErgoDesign features enhance human ergonomics (human and earth conditions). MultiSync monitor’s ErgoDesign will improve the working environment, protect the health of the user and save money. ErgoDesign parallels the strict European standards of power management and reduced emissions:

–automatic display power-down (also known as NUTEK specification 803299)

–emission characteristics (stricter than those referred to as reduced electromagnetic fields as recommended by MPR II and, for JC-2144UMB, also by TCO)

–safety (EN 60950)

MultiSync monitors comply with these standards by offering IPM System power management and Reduced Magnetic Field technology.

Power Manager

IPM (Intelligent Power Manager) System is an innovative power-saving utility that complies with both the EPA’s Energy Star requirements and Europe’s TCO NUTEK’s power management requirements. Energy Star products use less than 30 watts when in the main power saving mode. The NUTEK specification 803299 requires automatic power down to less than 30 watts in the suspend mode and less than 8 watts in the off mode.

When in the maximum power-down mode, the MultiSync E1100 monitor will consume less than 10% of the total power drawn under normal operation. This innovation adds up to more than 90% energy savings, longer monitor life, environmental protection, reduced