Star Micronics SP298 user manual Power Supply Specifications, 124, Consumption Current

124

Power Supply Specifications

Power Supply

AC Adaptor	PS48-24A, switching type
Input	90 to 264V AC, 50/60Hz
Output	24V DC ± 5%, 2.0A
Plug	3-pin POWER JACK TCP 8927 (Hoshiden brand or equivalent.)
Consumption Current
	Conditions: 24V, excluding external equipment driving
Operating	Continuous ASCII printing + paper feed: 0.6A
(approximate averages)	Solid block printing + paper feed: 1.0A
	Solid block printing: 1.9A
	Peak (solid printing): 3.1A
Stand-by	Paper release deactivated: 0.24 A
(approximate averages)	Paper release activated: 0.07A

Important!

•When using a printer power supply other than the optional AC adaptor (PS48- 24A), be sure that the following cautions are observed.

•Use a power supply of DC 24 V ± 5% and more than 2.0 A.

•Be careful about installing the printer in an area where there is noise. Take the appropriate measures to protect against electrostatic AC line noise, etc.

•The optional cable set can be connected.

APPENDIX