Star Micronics SP298 user manual Paper Specifications, 122

122

Paper Specifications

Paper Width	80 to 182mm / 3.15″ to 7.17″
Paper Length	80 to 257mm / 3.15″ to 10.8″
Copies	Original + 2
Paper Thickness	1-ply: 0.09 to 0.2mm / 0.0035″ to 0.0079″
	Duplicates	0.12 mm (minimum for 2-ply forms) to 0.25 mm/0.0047″ to 0.0098″
		<Maximum 0.2 mm when printing graphics>
Copy Offset	1.5mm maximum/15 lines (between top sheet and bottom sheet)
Binding	Top or left
Print Area
	Distance from first printed line (Head #1) to top of form (form stopper):		28.6 mm
	Distance from first printed line (Head #1) to TOF sensor:		26.0 mm
	(However, with the automatic start position operation, this distance is set to 26.5 mm.
	The automatic start position operation can be enabled or disabled with the memory
	switches.
	When the top-of-form sensor is disabled, a command can be used to perform a reverse
	paper feed enabling printing to begin at approximately 20 mm from the top of the paper.)
	Distance from last printed line (Head #9) to bottom of form (BOF sensor):		38.1 mm
	(With the ESC/POS mode, printing may continue to 27.3 mm from the bottom of the
	paper.)
	When the BOF sensor is disabled, printing can continue to 14.0 mm from the bottom of
	the paper.
	Right margin:		5.1 mm
	Print area width:		28.6 mm

	Form stopper (fixed)
		3.2
	Paper	TOF sensor (fixed)
	Head #1
	62.7	5.1	26.0	28.6
Paperfeed	822.
	First printed line
direction	Last printed line
		11.9	14
	Head #9		38.1
	Paper feed
	roller
		BOF sensor (fixed)
		3.2		Units: mm

APPENDIX