Star Micronics SP298 user manual ESC/POS Mode Commands TM-290 emulation, English

ENGLISH

27

ESC/POS Mode Commands (TM-290 emulation)

The following table lists the TM-290 emulation commands that are supported by this printer.

Control Codes		Hexadecimal	Function
		Codes
<HT>	09		Horizontal tab
<LF>	0A		Line feed
<FF>	0C		Paper eject in single sheet mode
<ESC> SP	1B	20	Sets size of space to right of character
<ESC> !	1B	21	Enables batch print mode
<ESC>#	1B	23	Sets memory switch
<ESC> *	1B	2A	Selects bit image mode
<ESC> 2	1B	32	Selects 1/6-inch line spacing
<ESC> 3	1B	33	Selects approximate n/60-inch line spacing *1
<ESC> @	1B	40	Initializes the printer
<ESC> D	1B	44	Sets horizontal tab position
<ESC> M	1B	4D	Selects the 7⋅ 9 font
<ESC> P	1B	50	Selects the 5⋅ 9 font

*1: n/60-inch line spacing and paper feed commands:

Since the minimum paper feed pitch for this printer is 1/144 inch, n/60 inch can considered an approximate value. However, the actual value is INT ((6n/5) + 0.5)/72 inch.