Star Micronics SP298 user manual ESC/POS Mode Commands TM-295 emulation, Esc Sp

ENGLISH

25

ESC/POS Mode Commands (TM-295 emulation)

The following table lists the TM-295 emulation commands that are supported by this printer.

Control Codes		Hexadecimal	Function
		Codes
<HT>	09		Horizontal tab
<LF>	0A		Line feed
<FF>	0C		Paper eject in single sheet mode
			Paper mode print and return
<DLE> <EOT>	10 04		Enables real-time status send (Serial I/F only)
<CAN>	18		Cancels print data in page mode
<ESC> SP	1B	20	Sets size of space to right of character
<ESC> !	1B	21	Enables batch print mode
<ESC>#	1B	23	Sets memory switch
<ESC> %	1B	25	Enables/disables download character set
<ESC> &	1B26		Defines download character
<ESC> *	1B	2A	Selects bit image mode
<ESC> 2	1B	32	Selects 1/6-inch line spacing
<ESC> 3	1B	33	Selects approximate n/60-inch line spacing *1
<ESC> =	1B	3D	Selects peripheral device
<ESC> @	1B	40	Initializes the printer
<ESC> C	1B	43	Sets the eject length for single-sheet printing
<ESC> D	1B	44	Sets horizontal tab position
<ESC> F	1B	46	Enables/disables reverse feed for single-sheet mode
<ESC> J	1B	4A	Prints and n/60-inch (approximate value) paper feed *1
<ESC> K	1B	4B	Prints and n/60-inch (approximate value) reverse paper feed *1

*1: n/60-inch line spacing and paper feed commands:

Since the minimum paper feed pitch for this printer is 1/144 inch, n/60 inch can considered an approximate value. However, the actual value is INT ((6n/5) + 0.5)/72 inch.