NEC manual NEC Versa M320 Disassembly Manual, Releasing the plastic hinge covers, Page

Page 15
Fig. 24 Releasing the plastic hinge covers

Fig. 24 Releasing the plastic hinge covers

4. Carefully lift up the LCD module as shown in Fig. 25 and put it in a safe place.

Fig. 25 Lifting up the LCD module

Note: When lifting up the LCD module, make sure that the LCD cable, the wireless antenna wires and the lid switch cable are freed up through the hole between the top cover and the base. When assembling the notebook, make sure that these cables are properly sited in place.

NEC Versa M320 Disassembly Manual

Page 15

Image 15
Contents Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contentsTechnician Notes Disassembly InstructionsReassembly Instructions OverviewAVERTISSEMENT Power Supply UnitHazardous Voltage Avoid Electrostatic DischargeRemoving the Hard Disk Drive Removing the BatteryRemoving the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 12 Removing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 11 Releasing the optical driveFig. 14 Removing the heat plate Removing the CPU4. Lift up the LED board as shown in Fig Fig. 18 Lifting up the CPU fan Fig. 19 Releasing the CPU Heat SinkM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sinkRemoving the LCD Module Fig. 22 Removing the CoilFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge coversDisassembling the LCD Panel 4. Unscrew all screws encircled in Fig Removing the Top Cover Fig. 32 Removing Wireless AntennaFig. 31 Removing the LCD Panel hinges Fig. 33 Removing the top cover screws A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 SilverA = M2x4.5 Silver Removing the Touch Pad Fig. 36 Touch Pad AssemblyFig. 35 Removing the top cover Removing the Floppy Disk Drive Fig. 37 Removing the FDDFig. 38 Lifting up the FDD Removing the Audio Board Fig. 39 Audio Board screws and speakers connectorFig. 40 Removing the audio front panel Fig. 41 Lifting the Audio Board Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 43 Removing the HDD flat cable connectorC = M2.5x5 Silver D = M5x6 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel A = M2.5x5 Silver B = M2x4 SilverRemoving the speakers Fig. 46 Removing Main BoardFig. 47 Screw at Audio Board Holder Seeting DIP Switch SettingDip Switch DescriptionScrews Versa M320 Disassembly Manual