NEC manual NEC Versa M320 Disassembly Manual, Removing the top cover screws, A = M2x4.5 Silver

Page 19
Fig. 33 Removing the top cover screws

1.Release all screws as shown in Fig. 33 and disconnect Touch Pad Connection from main board.

Fig. 33 Removing the top cover screws

2. Flip over the unit and remove the screws as shown in Fig. 34

Fig. 34 Removing the top cover screws on the bottom of the system

3. Carefully lift up, release the top cover, and put it aside.

A = M2.5x7 Silver

B = M2x4.5 Silver

M2.5x7 Silver

A = M2x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 19

Image 19
Contents Versa M320 Disassembly Manual NEC Versa M320 Disassembly Manual Table of contentsTechnician Notes Disassembly InstructionsReassembly Instructions OverviewAVERTISSEMENT Power Supply UnitHazardous Voltage Avoid Electrostatic DischargeRemoving the Hard Disk Drive Removing the BatteryRemoving the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 12 Removing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 11 Releasing the optical driveFig. 14 Removing the heat plate Removing the CPU4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 21 Releasing the CPU Fig. 20 Removing the heat sinkFig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 25 Lifting up the LCD module Fig. 24 Releasing the plastic hinge coversDisassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 41 Lifting the Audio Board Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 43 Removing the HDD flat cable connectorC = M2.5x5 Silver D = M5x6 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel A = M2.5x5 Silver B = M2x4 SilverFig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Seeting DIP Switch SettingDip Switch DescriptionScrews Versa M320 Disassembly Manual